Ik1 Safety Warnings - Danfoss IK1 User Manual

User Manual
Remote Control IK1 Transmitter
Safety instructions

IK1 Safety Warnings

Quick reference precautions
©
Danfoss | March 2024
W
Warning
Potential damage to the operator or the product. Do not use this product on machines in potentially
explosive atmospheres unless the model is ATEX/RATEX certified to work in such conditions.
Potential damage to operator and product.
Follow the guidelines below to reduce risk of injury to the operator and the product.
Neodimium Magnet on Handle lower Part.
Beware Users with Pacemakers to avoid approaching the device to the chest.
•
Use the device with the manufacturer's battery and battery charger (if applicable).
•
Only allow qualified personnel to operate the equipment.
•
Always set the STOP button in the off position when not in use.
•
Always press STOP before plugging in tether cable (if applicable).
•
Remove the Tether connection on the transmitter First (if applicable).
•
Do not operate product when visibility is limited.
•
Make sure product is compatible with the machine.
•
Avoid knocking or dropping the product.
•
Do not use the product if a failure is detected.
Changes or modifications not approved by Danfoss can void the user's authority to operate this product.
BC483463529151en-000101 | 5