Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Autool BT860
Summary of Contents for Autool BT860
- Page 1 AUTOOL BT860 Battery System Tester User Manual www.autooltech.com...
- Page 2 企业标准 / Corporate standard: Q/OR 003-2023...
- Page 3 COPYRIGHT INFORMATION Copyright ● All rights reserved by AUTOOL TECH. CO., LTD. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of AUTOOL.
- Page 4 CAUTIONS Safety Before using the instrument, please read this manual careful- precautions ly for proper operation. The tester is suitable for both 12V and 24V vehicle batteries. The tester is suitable for operation at voltages ranging from 9V to 35V direct current (DC). If the battery is just fully charged, the voltage will be slightly higherthan normal.
-
Page 5: Table Of Contents
TABLE OF CONTENTS Product Introduction ..................2 Overview ......................2 Product specification ..................2 Product features....................2 Product Structure ....................4 Structure diagram.................... 4 Operations Instruction ..................5 Function instructions ..................5 Battery capacity....................6 Cranking test ....................8 Charge system ....................9 Data report print .................... -
Page 6: Product Introduction
PRODUCT INTRODUCTION Overview This is an automotive battery tester with real time temperature monitoring, which is able to determine the exact degree of influence of temperature on the battery performance. The instrument adopts advanced conductivity testing technology, which can easily, quickly and accurately test the battery perfor- mance of cranking ability, cranking load, maximum load and charging system of the car battery. - Page 7 ● Real-time time display and supports for 10 languages; ● With data storage, previously measured data can be reviewed at any time; ● 3.2-inch HD display; ● Test standards are in line with most battery standards in the world.
-
Page 8: Product Structure
PRODUCT STRUCTURE Structure diagram Print tray HD display screen Test clamps Operation buttons Introduction of Operation buttons and test clamp functions <▲> <▼>: ● UP; DOWN; Page up and down buttons; <Return>: ● To cancel, undo, and the return key. ●... -
Page 9: Operations Instruction
OPERATIONS INSTRUCTION Function ● The tester is powered only by the vehicle battery. Clamp the instructions red and black clips of the tester to the positive (+) and negative (-) terminals of the battery safely and securely respectively. It is recommended to clip the red clamp first, then the black clamp, until the screen shows the following picture, the tester is in operation. -
Page 10: Battery Capacity
Battery The tester will test the cranking capacity of the batteries and will capacity determine the condition of the batteries based on the rated crank- ing capacity marked on each battery. ● Please make sure the engine and all electrical equipment on the vehicle is shut down before testing. - Page 11 ● According to the rated cranking current value marked on the battery body, press the <▲> <▼> key to adjust the standard value of “CCA RATED”, and press the <OK> key to enter the test. ● When the test is complete, the tester screen will display the following test results, like this.
-
Page 12: Cranking Test
Life span Test result Note Battery’s in good condition. Good >80% Average Battery’s condition is acceptable. >60% Battery life is approaching and Alert >45% be careful. The battery life has expired, Replace >45% please replace. Cranking test The tester will measure the voltage and discharge speed during the cranking process to determine the starting condition of the car. -
Page 13: Charge System
Test results are automatically saved for review. At this time, ● you can also press <OK> to enter the “Print Report” interface to print the test results or press <Return> directly to the “Main Menu” interface. ● If the minimum voltage reading is greater than 9.6V (greater than 16V relative to a 24V system), the cranking system is good. -
Page 14: Data Report Print
Test results are automatically saved for review. At this time, ● you can also press <OK> to enter the “Print Report” interface to print the test results or press <Return> directly to the “Main Menu” interface. Battery State Engine performance Voltage Normal >13.5... -
Page 15: Data Review
The vehicle to which the report belongs needs to be set ● according to the Vehicle Identification Number (VIN) before the report can be printed. ● Press the <▲> <▼> key to enter the code, then press the <OK> to enter the next value until the last value is finished. Press the <OK>... - Page 16 Press the <OK> button, you can cycle through the last test ● results of “BATTERY CAPACITY”, “CRANKING TEST” and “CHARGE SYSTEM”.
-
Page 17: Maintenance Service
MAINTENANCE SERVICE Our products are made of long-lasting and durable materials, and we insist on perfect production process. Each product leaves the factory after 35 procedures and 12 times of testing and inspec- tion work, which ensures that each product has excellent quality and performance. -
Page 18: Warranty
Disclaimer All information, illustrations, and specifications contained in this manual, AUTOOL resumes the right of modify this manual and the machine itself with no prior notice. The physical appearance and color may differ from what is shown in the manual, please refer to the actual product. -
Page 19: Return & Exchange Service
RETURN & EXCHANGE SERVICE ● If you are an AUTOOL user and are not satisfied with the Return & AUTOOL products purchased from the online authorized Exchange shopping platform and offline authorized dealers, you can return the products within seven days from the date of receipt;...
Need help?
Do you have a question about the BT860 and is the answer not in the manual?
Questions and answers