Download  Print this page

Cd Player Operation; Auxiliary Equipment - Aiwa CDC-Z117 Operating Instructions Manual

Stereo car cd receiver.
Hide thumbs

Advertisement

CD PLAYER OPERATION

Playing a CD
You can play CDs, CD-Rs and CD-RWs using the
procedure described below.
1
Insert a CD.
"CD" appears in the display.
CD play starts.
If a CD is already inserted, press FNC repeatedly to
select CD play mode.
In normal play, when the last track finishes, the unit
returns to the first track and continues to play.
Labeled-side up
CD indicator
Elapsed playing time
To
Eject a CD
Skip to the next track
Go back to the beginning
of the current track
Each extra press skips
backward one extra track
Locate a specific point in
a track
Note
• When you play a CD that is already inserted, CD play
starts at the point where it stopped the previous time.
A newly inserted CD starts from the first track.
• A CD-R or CD-RW may take some time to start playing
back, but this is not a malfunction.
• If a CD-R or CD-RW with no data or incompatible data
is inserted, "E03" will appear in the display. The unit
cannot play such discs.
5
5
ENGLISH
ENGLISH
Track number
Press
z
t
r
Press and hold r or
t until you find the
point.
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on a CD.
1
Press INT during CD play.
"SCAN" appears in the display.
2
Press INT again when the desired track is played.
The unit returns to normal CD play.
One track Repeat Play
You can play a track repeatedly.
1
Press REP1 during CD play.
"REPEAT1" appears in the display.
To cancel One track Repeat Play, press REP1 again.
Random Play
You can play all the tracks in random order.
1
Press RNDM during CD play.
"RANDOM" appears in the display.
To cancel Random Play, press RNDM again.
Note
During Random Play, pressing r allows you to skip
only to the beginning of the current track, not to the
previous track.

AUXILIARY EQUIPMENT

Listening to a cassette/MD/MP3 portable
player or other equipment
You can listen to equipment connected to the unit. Refer
to the operating instructions for the corresponding
equipment for more detailed information.
Be sure to remove inserted CDs to prevent possible
damage to the unit before connecting the equipment.
1
Connect a cassette/MD/MP3 portable player or other
equipment via the unit's AUX IN jack (3.5 mm).
2
Press FNC repeatedly until "AUX" appears in the
display.
During AUX mode, the clock display appears.
AUX IN jack

Advertisement

Table of Contents

   Also See for Aiwa CDC-Z117

   Related Manuals for Aiwa CDC-Z117

Comments to this Manuals

Symbols: 0
Latest comments: