Cd Player Operation - Aiwa CDC-X927M Operating Instructions Manual

Presetting stations automatically
(Auto Memory)
1
Press BAND repeatedly to select the desired band
(F1, F2, F3, A1 or A2).
2
Press and hold PS/A.ME until automatic presetting
starts. "A MEM" appears on the display.
The unit automatically stores up to 6 stations for
each band.
After completion of automatic presetting, the unit
tunes in to all the stations stored on the preset
station buttons in order (Preset Scan).
To cancel automatic presetting, press PS/A.ME again.
Checking the preset stations (Preset Scan)
1
Press PS/A.ME briefly.
Each preset station will be tuned in for 5 seconds in
order.
To cancel Preset Scan, press PS/A.ME again or any
preset station button.
Presetting stations manually
(Manual Memory)
1
Press BAND repeatedly to select the desired band
(F1, F2, F3, A1 or A2).
2
Press TUNEi or TUNEk to tune in to a desired
station (see "Tuning in to a station," page 3).
3
Press and hold the desired preset station button until
the unit beeps.
Note
A newly preset station replaces the station on the same
band that was previously stored on that preset station
button.
Tuning in to a preset station
1
Press BAND repeatedly to select the desired band
(F1, F2, F3, A1 or A2).
2
Press the preset station button on which the desired
station is stored.
Active tuning reception control (ATRC)
The unit automatically suppresses FM noise caused by
vehicle movement, and maintains sound quality.

CD PLAYER OPERATION

Playing a CD
You can play CDs, CD-Rs and CD-RWs using the
procedure described below.
1
Press z to open the front panel.
2
Insert a CD.
The front panel will be closed automatically and
"CD" appears on the display.
CD play starts.
If a CD is already inserted, press SRC repeatedly to
select CD play mode.
In normal play, when the last track finishes, the unit
returns to the first track and continues to play.
Labeled-side up
CD indicator
Track number
To
Eject a CD
Skip to the next track
Go back to the beginning
of the current track
Each extra press skips
backward one extra track
Locate a specific point in
a track
* When you remove the CD, the front panel will be
closed automatically after a while.
To close the front panel manually, press z while the
front panel is open.
EJECT
INT RNDM
REP1
Elapsed playing time
Press
z*
t
r
Press and hold r or
t until you find the
point.
ENGLISH ENGLISH
SRC
4 4