Cd Player Operation - Aiwa CDC-X917M Operating Instructions Manual

Presetting stations manually
(Manual Memory)
1
Press FUNCTION repeatedly to select the desired
band (F1, F2, F3, A1 or A2).
2
Press TUNEi or TUNEk to tune in to a desired
station (see "Tuning in to a station," page 3).
3
Press and hold the desired preset station button until
the unit beeps.
Note
A newly preset station replaces the station on the same
band that was previously stored on that preset station
button.
Tuning in to a preset station
1
Press FUNCTION repeatedly to select the desired
band (F1, F2, F3, A1 or A2).
2
Press the preset station button on which the desired
station is stored.
Active tuning reception control (ATRC)
The unit automatically suppresses FM noise caused by
vehicle movement, and maintains sound quality.
Using the timer
(My Information)
You can schedule the radio to activate for daily radio
programs. The unit automatically turns on and off in
Radio mode at the scheduled times.
1
Turn off the unit.
2
Press and hold INFO until "PROGRAM", flashes in
the display.
3
Press the preset station button 1(for PROGRAM 1)
or 2 (for PROGRAM 2) to select the desired timer.
4
Press SEL twice.
5
Set the time you wish the unit to turn on.
• Press TUNEk and press + or – to set the hour.
• Press TUNEi and press + or – to set the minute.
6
Press SEL twice.
7
Press FUNCTION to select the band.
8
Press TUNEi, TUNEk or the desired preset
station button to select the station.
9
Press SEL twice.
10
Set the time you wish the unit to turn off following the
same procedure used in step 5.
11
Press SEL.
12
Press INFO.
The unit turns off, and setting is completed.
• If you preset another program, preset all the steps
from step 1.
• To cancel a timer setting in progress, press and
hold PWR/MUTE to turn off the unit.
When the unit is on, "MY INFO" appears in the
display indicating that the unit is standby for a timer.
During the timer-activated tuning, "MY INFO",
continues to flash.
To cancel the timer standby
1 Press INFO repeatedly to select the desired
timer (PRG 1 or PRG 2).
2 Press TUNEi or TUNEk to select "OFF".
3 Press INFO again.
Note
• When you preset two programs, be sure that they do
not overlap.
• The unit automatically starts tuning at the scheduled
time regardless of the current source mode. When the
scheduled program is over, the unit automatically
returns to the former source mode.
• When this function is activated, TUNEi/k, A.ME/PS,
LO, INFO, and the preset number buttons do not work
for tuning in stations.
• However, if you press FUNCTION
source mode during timer-activated tuning, the
scheduled program is canceled.

CD PLAYER OPERATION

Playing a CD
You can play CDs, CD-Rs and CD-RWs using the
procedure described below.
1
Press z to open the front panel.
2
Insert a CD.
The front panel will be closed automatically and
"CD" appears in the display.
CD play starts.
If a CD is already inserted, press FUNCTION
repeatedly to select CD play mode.
In normal play, when the last track finishes, the unit
returns to the first track and continues to play.
to change the
4 4
ENGLISH ENGLISH