Download  Print this page

Radio Operation - Aiwa CDC-Z117 Operating Instructions Manual

Stereo car cd receiver.
Hide thumbs

Advertisement

Setting the clock
1
Press and hold DISP until the clock indicator flashes
in the display.
2
Press TUNEi (to set hour) or TUNEk (to set
minute) and turn the Smart Jog.
3
Press DISP.
Displaying the clock
1
Press DISP.
To return to the former display, press DISP again.

RADIO OPERATION

Tuning in to a station
(Seek/Manual Tuning)
Stereo indicator Local indicator
Band indicator Frequency indication
1
Press FNC repeatedly to select the desired band
(FM1, FM2, FM3, AM1 or AM2).
2*
Press TUNEi (to move to higher frequencies) or
TUNEk (to move to lower frequencies) to tune in to
a station.
"ST" appears in the display when a station is
broadcasting in stereo, and receiving conditions are
good.
*Seek Tuning and Manual Tuning
• Press and hold TUNEi or TUNEk until seek Tuning
starts.
The unit locates a station automatically (Seek Tuning).
• Press TUNEi or TUNEk repeatedly to search for a
desired station while increasing or decreasing the
frequency step by step (Manual Tuning).
To stop Seek Tuning, press TUNEi or TUNEk
again.
3
3
ENGLISH
ENGLISH
Monaural mode
When signals become weak, or reception becomes
poor, the unit automatically switches to Monaural mode
to reduce noise.
Local mode
Local mode allows you to tune in only to strong stations
during Seek Tuning.
1
Press LO before you start seek tuning.
"LO" appears in the display.
To return to Distant mode, press LO again.
"LO" disappears and the unit tunes in to all receivable
stations.
Using preset stations
You must preset stations before you can tune in a station
using preset station number buttons.
Presetting stations automatically
(Auto Memory)
1
Press FNC repeatedly to select the desired band
(FM1, FM2, FM3, AM1 or AM2).
2
Press and hold PS/A.ME until automatic presetting
starts.
The unit automatically stores up to 6 stations for
each band.
After completion of automatic presetting, the unit
tunes in to the station stored on preset station
button 1.
To cancel automatic presetting, press PS/A.ME again.
Checking the preset stations (Preset Scan)
1
Press PS/A.ME briefly.
Each preset station will be tuned in for 5 seconds in
order.
To cancel Preset Scan, press PS/A.ME again or any
preset station button.
Preset station buttons 1 ~ 6
Preset station
number

Advertisement

Table of Contents

   Also See for Aiwa CDC-Z117

   Related Manuals for Aiwa CDC-Z117

Comments to this Manuals

Symbols: 0
Latest comments: