1. Manuals
  2. Brands
  3. Evident Manuals
  4. Microscope
  5. SZX2 Series
  6. Instructions manual

Evident SZX2 Series Instructions Manual

Hide thumbs

Advertisement

Table of Contents

Modules described
in this manual
SZX2-ZB16A
SZX2-RFA16A
SZX2-FOA
SZX2-MDCU
SZX-MDHSW
SZX-MDFSW
This instruction manual is for the Evident SZX2 motorized microscope system. To ensure
the safety, obtain optimum performance and to familiarize yourself fully with the use of this
system, we recommend that you study this manual thoroughly before operating the system.
Retain this instruction manual in an easily accessible place near the work desk for future
reference.
SZX2
MOTORIZED
SYSTEM
Optical Microscope and Accessory

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SZX2 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Evident SZX2 Series

Summary of Contents for Evident SZX2 Series

  • Page 1 SZX2 MOTORIZED SYSTEM This instruction manual is for the Evident SZX2 motorized microscope system. To ensure Optical Microscope and Accessory the safety, obtain optimum performance and to familiarize yourself fully with the use of this system, we recommend that you study this manual thoroughly before operating the system.
  • Page 2 Refer to your local Evident distributor in EU for return and/or collection systems available in your country. NOTE: This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

  • Page 3: Table Of Contents

    CONTENTS IMPORTANT — Be sure to read this section for safe use of the equipment. — MOTORIZED MODULE SYSTEM DIAGRAM MOTORIZED MODULE CONTROLS MOTORIZED CONTROL OPERATIONS 3-1 Preparation ........................................7 3-2 Operation of Hand Switch SZX-MDHSW ......................8 3-3 Operation of Foot Switch SZX-MDFSW........................9 PROPER SELECTION OF THE POWER SUPPLY CORD ..............
  • Page 4 3. Be sure to set the main switch of the SZX2-MDCU control unit to “ ” (OFF) before connecting the cables. 4. Always ensure that the grounding terminal is properly connected. If the equipment is not grounded, Evident can no longer warrant the electrical safety performance of the equipment.
  • Page 5 SZX2 MOTORIZED SYSTEM Safety Symbols The following symbols are found on the system. Study the meaning of the symbols and always use the equipment in the safest possible manner. Symbol Explanation Be careful not to have your finger or hand caught by the mechanism (the column and cover of the focusing module or between the objective and specimen).
  • Page 6 Be sure to connect the specified module to each connector. If equipment other than the specified module is connected, Evident can no longer warrant any performance of the system. Be sure to set the main switch of the SZX2-MDCU control unit to “...
  • Page 7 SZX2 MOTORIZED SYSTEM MOTORIZED MODULE CONTROLS Motorized Zoom Microscope Frame }For the controls that are not described below, refer to the Instruction SZX2-ZB16A manual for the SZX16. Motorized zoom ratio indication Zooming stroke: 0.7X to 11.5X (non-motorized) 0.735X to 11X (motorized) Observation tube mount Zoom ratio indication: 0.7/0.8/1/1.25/1.6/2/2.5/ 3.2/4/5/6.3/8/10/11.5...
  • Page 8 Motorized Focusing Module When using the 2X objective, be careful not to lower it too much to prevent it SZX2-FOA from interfering wit the base. Motorized focus control block Focusing stroke: 78 mm Focusing speed: 0.27 mm/sec. (fine focus adjustment), 2.7 mm/sec.
  • Page 9 SZX2 MOTORIZED SYSTEM Hand Switch SZX-MDHSW FOCUS ▲ ▲ ▲ ▲ ▲ UP button FOCUS ▼ ▼ ▼ ▼ ▼ DOWN button ZOOM ▲ ▲ ▲ ▲ ▲ UP button ZOOM ▼ ▼ ▼ ▼ ▼ DOWN button Foot Switch SZX-MDFSW ZOOM/FOCUS ▼...

  • Page 10: Motorized Control Operations

    Cables are vulnerable when bent or twisted. Never subject them to excessive force. Always use the power cord provided by Evident. If no power cord is provided, please select the proper power cord by referring to the section “PROPER SELECTION OF THE POWER SUPPLY CORD” at the end of this instruction manual.

  • Page 11: Operation Of Hand Switch Szx-Mdhsw

    SZX2 MOTORIZED SYSTEM 4. If you do not want to set the DIP switch, set the main switch 1 of the SZX2-MDCU control unit to “ ” (ON). The pilot LED 2 should light up to indicate the ON status of the unit. ²...

  • Page 12: Operation Of Foot Switch Szx-Mdfsw

    3-3 Operation of Foot Switch SZX-MDFSW }When a ZOOM or FOCUS pedal is held until the upper or lower limit of control is reached, an electronic tone (short beep) is generated (provided that it is enabled by the DIP switch) and the control stops. }If pedals 2 and 3 are pressed simultaneously, no control operation occurs to prevent malfunction.

  • Page 13: Proper Selection Of The Power Supply Cord

    If no power supply cord is provided, please select the proper power supply cord for the equipment by referring to “Specifications” and “Certified Cord” below: Caution : In case you use a non-approved power supply cord for Evident products, Evident can no longer warrant the electrical safety of the equipment.
  • Page 14 Table 2 HAR Flexible Cord APPROVAL ORGANIZATIONS AND CORDAGE HARMONIZATION MARKING METHODS Alternative Marking Utilizing Printed or Embossed Harmoniza- Black-Red-Yellow Thread (Length tion Marking (May be located on Approval Organization of color section in mm) jacket or insulation of internal wir- ing) Black Yellow...
  • Page 16 Distributed by Evident Europe GmbH Caffamacherreihe 8-10, 20355 Hamburg, Germany Evident Europe GmbH – UK Branch Part 2nd Floor Part A, Endeavour House, Coopers End Road, Stansted CM24 1AL, UK Evident Scientific, Inc. 48 Woerd Ave, Waltham, MA 02453, USA Evident Scientific Singapore PTE.

This manual is also suitable for:

Szx2-zb16aSzx2-rfa16aSzx2-foaSzx2-mdcuSzx-mdhswSzx-mdfsw

Table of Contents