RTS 10D14 REIMS-GUEUX PAVILLON CENTRAL Assembly Instructions Manual

Advertisement

ASSEMBLY INSTRUCTIONS
RTS 10D14 REIMS-GUEUX PAVILLON CENTRAL
CONGRATULATIONS
Congratulations in choosing a unique product to enhance your slot car track
diorama. This can truly be described as a product born from a love for slot cars.
Buying this product have made you a member of a very special family, yes you are
not dealing with a faceless business, but rather a family of slot car fanatics.
We put hours of research and skill and more importantly love into our products and it
is wonderful to share our love for slot cars with you. May you enjoy the build and
have years of joy having it as part of your trackside diorama.
This product is a replica of the Reims-Gueux Pavillon Central Building, dating back
to the middle years of the previous century. As the name indicates this building was
the heart or centre of the Reims-Gueux circuit. The circuit was closed in 1972 and
soon the buildings and structures started to deteriorate, but fortunately this building
was salvaged from demolition. It deteriorated over time but was renovated in the last
couple of years by a group of volunteers. This building was positioned at the middle
of the pit buildings along the main straight and dates back to 1933. The ground level
housed some
pits, on the next level offices of the College of Commissioners and the
Automobile and Tourist Action bar. The upper two floors housed a panoramic restaurant with
amazing views of the main straight and all the facilities.
We believe that we have captured the ambiance of this historic structure and is
proud that we can also give it a second life on many a slot car trackside. We believe
that this structure can be a valuable contribution to the slot car diorama world.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 10D14 REIMS-GUEUX PAVILLON CENTRAL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RTS 10D14 REIMS-GUEUX PAVILLON CENTRAL

  • Page 1 ASSEMBLY INSTRUCTIONS RTS 10D14 REIMS-GUEUX PAVILLON CENTRAL CONGRATULATIONS Congratulations in choosing a unique product to enhance your slot car track diorama. This can truly be described as a product born from a love for slot cars. Buying this product have made you a member of a very special family, yes you are not dealing with a faceless business, but rather a family of slot car fanatics.
  • Page 2: Warranty

    A photo of the restored building above. WARRANTY This product is covered by a comprehensive money-back warranty to ensure your absolute satisfaction with your purchase. WHO ARE WE? This product is brought to you by racetrackscenics.com. If you have not done so already, please visit our website today.
  • Page 3: What Is In The Kit

    WHAT IS IN THE KIT? In this kit you will find all the laser cut pieced needed to assemble this product. The pieces are still intact in the sheets as they were cut to ensure that all the parts are there.
  • Page 4 WORD OF ADVICE We would strongly advise you to do a quick dry assembly before you start gluing the laser cut parts together. Lay out all the parts on your work surface and make sure that the parts are not upside down or mirrored. In most instances it will make no difference, but in others it may be crucial to ensure a perfect product in the end.
  • Page 5: Familiarize Yourself

    FAMILIARIZE YOURSELF Have a look at a photo of the finished product. There may be small deviations to the kit due to continuous upgrading of the kit. MAIN STRUCTURE Now have a look at the diagram below where all the laser cut parts for the main structure are shown and numbered from A to N.
  • Page 6 The front wall has an outer skin (A) and an inner skin (B). The rear wall is (G) and there is a rafter support beam that must fit where the engraving shows its position right at the top. The left-side wall is made up of the inner skin (C) and the outer skin (D).
  • Page 7 THE TURRET AND GENERAL FINISHES Now have a look at the diagram below where all the laser cut parts for the turret are shown, as well as some general finishes pieces. We will identify which is which and where they fit in. There are four roof trusses (A 1-5) and then the five walls of the turret (C 1-5).
  • Page 8 LET’S GET STARTED WITH THE ASSEMBLY MAIN STRUCTURE The first step in the assembly will be to glue the skins of the three double skin walls together. You will notice that the inner skins have nubs that will fit into the slots in the foundation floor (H).
  • Page 9 positioning. This completes the sub-assembly of the turret and the turret can now be glued onto the main structure. The two floors and roof of the turret should line up with the upper three floors of the main structure. This is where the glue can be applied in order to glue the turret to the main structure.

Table of Contents