Table of Contents
Advertisement
Quick Links
CONGRATULATIONS
Congratulations in choosing a unique product to enhance your slot car track
diorama. This can truly be described as a product born from a love for slot cars.
Buying this product have made you a member of a very special family, yes you are
not dealing with a faceless business, but rather a family of slot car fanatics.
We put hours of skill and more importantly love into our products and it is wonderful
to share our love for slot cars with you. May you enjoy the build and have years of
joy having it as part of your trackside diorama.
This product is an imaginary structure, but likewise structures can be found at
racetracks around the world. This stand is specifically designed to be positioned
inside a hairpin bend. We believe that this stand can be the focal point of any slot car
trackside diorama.
WARRANTY
This product is covered by a comprehensive money-back warranty to ensure your
absolute satisfaction with your purchase.
WHO ARE WE?
This product is brought to you by racetrackscenics.com. If you have not done so
already, please visit our website today. You are also most welcome to visit the
Facebook pages
"Race Track Scenics Slot Car Scenery" and "Johan Malan" to
keep up to date with the latest developments and the launching of exciting new
products that may be in the pipeline.
You can contact Kevin Sharpe on
Email: racetrackscenics@gmail.com
Text in the USA 586 549 2879
WhatsApp 1-586-549-2879
for any assistance that you might require. Your feedback and a photo or two of your
trackside addition will really be appreciated. We love to share in your joy!
WHAT IS IN THE KIT?
In this kit you will find all the laser cut pieced needed to assemble this product. The
pieces are still intact in the sheets as they were cut to ensure that all the parts are
there. Some of the loose bits inside pieces may have been removed, but they are not
part of the finished product. In the section "FAMILIARIZE YOURSELF" below, you
ASSEMBLY INSTRUCTIONS
RTS 1S1A MILANO HAIRPIN PAVILION
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RTS 1S1A MILANO HAIRPIN PAVILION
Summary of Contents for RTS 1S1A MILANO HAIRPIN PAVILION
- Page 1 ASSEMBLY INSTRUCTIONS RTS 1S1A MILANO HAIRPIN PAVILION CONGRATULATIONS Congratulations in choosing a unique product to enhance your slot car track diorama. This can truly be described as a product born from a love for slot cars. Buying this product have made you a member of a very special family, yes you are not dealing with a faceless business, but rather a family of slot car fanatics.
- Page 2 will find diagram(s) that identify and explain each piece (component) that you are about to assemble. In the section “PREPARING THE CUT PIECES” below, you will learn how to proceed to prepare the pieces for assembly. In the kit you will also find some optional pre-cut artwork printed on matt photo paper.
- Page 3 FAMILIARIZE YOURSELF Have a look at a photo of the finished product. Now have a look at the next diagram where all the laser cut parts are shown and numbered from A to R. Next, we will identify which is which and where they fit in.
- Page 4 You will notice the floor slab (A) and the three main vertical girders (E 1-2) and (F) that carries the roof (D). The girders fit into the floor slab (A). The floor slab is elevated above the level of the track by four foundation walls, (B 1-2) and (C 1-2). The seats (G 1-4) are supported by two supports (K 1-2) that fits into the floor slab (A), as well as by the girders (E 1-2).
- Page 5 WORD OF ADVICE We would strongly advise you to do a quick dry assembly before you start gluing the laser cut parts together. Lay out all the parts on your work surface and make sure that the parts are not upside down or mirrored. In most instances it will make no difference, but in others it may be crucial to ensure a perfect product in the end.
- Page 6 Proceed to glue the nubs of the three main vertical girders (E 1-2) and (F) into the slots of the floor slab (A). All that is needed for a proper sturdy assembly is some glue where any two parts touch each other. The lugs that fit into the slots stop any movement, but the glue holds all the parts together.
- Page 7 FINISHING & BRANDING We leave the finishing to your imagination and your taste. Do whatever you think will transform this into a structure that will compliment your race track diorama. We have included some artwork and would suggest that you protect it with a clear spray. The artwork supplied for the rear of the main girder: CONCLUSION We sincerely hoped you have enjoyed this assembly and finishing.
Need help?
Do you have a question about the 1S1A MILANO HAIRPIN PAVILION and is the answer not in the manual?
Questions and answers