Download Print this page

Advertisement

Available languages

Available languages

Quick Links

MANUALE D'USO
INSTRUCTION MANUAL
MODELLI
:
BL188WC BL188BC BL188W BL188B BL288WC BL288BC BL288W
BL288B BL388WC BL388BC BL388W BL388B BL488W BL488BC
BL488W BL488B BL788WC BL788BC BL788W BL788B BL1088WC
BL1088BC BL1088W BL1088B

Advertisement

loading
Need help?

Need help?

Do you have a question about the BL188WC and is the answer not in the manual?

Questions and answers

Summary of Contents for Gastrodomus BL188WC

  • Page 1 MANUALE D’USO INSTRUCTION MANUAL MODELLI BL188WC BL188BC BL188W BL188B BL288WC BL288BC BL288W BL288B BL388WC BL388BC BL388W BL388B BL488W BL488BC BL488W BL488B BL788WC BL788BC BL788W BL788B BL1088WC BL1088BC BL1088W BL1088B...
  • Page 2: Contenuto Dell'imballo

    CONSIGLI SULLA SICUREZZA • Posizionare su una superficie piana e stabile. • L’installazione ed eventuali riparazioni devono essere eseguite da addetti del service o tecnici qualificati. Non rimuovere alcun componente o pannello di servizio da questo prodotto. • Consultare gli standard locali e nazionali per attenersi a quanto segue: o Normative sulla salute e sicurezza sul posto di lavoro o Codici di condotta BS EN o Precauzioni antincendio...
  • Page 3: Installazione

    INSTALLAZIONE Nota: Se l’attrezzatura non è stata conservata o posta in posizione eretta, lasciarla in posizione verticale per circa 12 ore prima di avviarla. In caso di dubbi, lasciare il macchinario in posizione verticale. 1. Rimuovere l’attrezzatura dall’imballaggio. Assicurarsi che tutte le pellicole protettive e i rivestimenti siano state rimosse dall’attrezzatura.
  • Page 4: Pulizia Del Condensatore

    PULIZIA, CURA & MANUTENZIONE • Spegnere e scollegare il dispositivo dall’alimentazione prima di pulire. • Pulire l’interno del dispositivo quanto più spesso possibile. • Non usare detergenti con agenti abrasivi. Potrebbero lasciare residui nocivi. • Pulire le guarnizioni degli sportelli unicamente con acqua. •...
  • Page 6: Safety Tips

    Safety Tips • Position on a flat and stable surface. • A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components or service panels on this product. • Consult Local and National Standards to comply with the following: o Health and Safety at Work Legislation o BS EN Codes of Practice o Fire Precautions o IEE Wiring Regulations...
  • Page 7: Installation

    Installation Note: if the appliance has not been stored or moved in an upright position, let it stand upright for approximately 12 hours before operation. If in doubt allow the appliance to stand. 1. Remove the appliance from the packaging. Make sure that all protective plastic film and coatings ate thoroughly removed from all surfaces.
  • Page 8: Cleaning The Condenser

    Cleaning, Care & Maintenance • Switch off and disconnect from the power supply before cleaning. • Clean the interior of the appliance as often as possible. • Do not use abrasive cleaning agents. These can leave harmful residues. • Clean the door seal with water only. •...
  • Page 10 Via Valcunsat 16 33072 Casarsa Della Delizia (PN) Tel: (+39) 0434 86 92 32 email: info@gastrodomus.it https://www.gastrodomus.it...