Table of Contents
Advertisement
Mounting the Controller
3-1 Mounting the Controller
There are two ways to mount the Controller: DIN Track mounting or surface-
mounting.
3-1-1 DIN Track Mounting
The Controller can be easily mounted to or removed from 35-mm DIN Track.
Mounting the Controller
Hook the Controller into the DIN Track as shown in the diagram and then press
in at the bottom until the Controller locks into place.
Removing the Controller
Use a flat-bladed screwdriver to pull the hook down and then pull out the Con-
troller from the bottom.
48
OMRON's PFP-M
End Plate
Hook
Section 3-1
DIN Track
The following DIN Tracks are available
from OMRON.
PFP-100N (1 m)
PFP-50N (50 cm)
PFP-100N2 (1 m)
Advertisement
Table of Contents
