Beton Trowel nv 2. T ABLE OF CONTENTS Foreword ..............................3 Table of contents ............................4 Safety Precautions ............................. 6 Assembly Instructions ..........................7 Battery – Shipped dry – No acid ........................7 Steering handle assembly .......................... 7 Pitch control Assembly ..........................7 Seat Assembly ..............................
Page 5
Beton Trowel nv Maintenance plan ............................12 Service ................................. 14 Labels ............................... 15 Specifications ............................16 Technical data sheet ..........................16 Parts ................................. 17 Framework + Guardring........................... 17 Power System ............................19 Operating System ............................ 21 GEARBOX ASSY (L) PARTS LIST ......................... 24 GEARBOX ASSY (R) PARTS LIST ........................
Beton Trowel nv 3. S AFETY RECAUTIONS ❖ Always keep unauthorized, inexperienced, untrained people away from this machine. ❖ Rotating and moving parts will cause injury if contacted. Make sure guards are in place. Keep hands and feet away from moving parts.
Beton Trowel nv 4. A SSEMBLY NSTRUCTIONS – S – N ATTERY HIPPED DRY O ACID Connect and secure the battery cables before attempting starting procedures. TEERING HANDLE ASSEMBLY The steering handles are shipped ready to connect. Position the handles over the handle sleeves so that the set-screws (2 per handle) are lined up with the tapped holes on the sleeves.
Beton Trowel nv 5. O PERATING NSTRUCTIONS – TARTING PROCEDURES WARM TEMPERATURES ❖ Prior to starting the trowel, check the engine and gearbox oil levels. Be sure the fuel tank is full. ❖ Fuel is not shipped with the unit. Check engine and gearbox oil levels. WARRANTY IS VOID IF RUN WITHOUT OIL.
Beton Trowel nv WARNING: SERIOUS INJURY OR PROPERTY DAMAGE MAY RESULT DUE TO TEMPORARY LOSS OF CONTROL IF OPERATED WITH EXCESS LIQUID ON THE CONCRETE SURFACE. LOAT ROWEL PITCH SETTING Once you are familiar with the steering functions on a flat floor, you are ready to combine the steering with float/trowel pitch settings to produce the finish you require.
After reading through this manual thoroughly, you will find that you can do some of the regular maintenance yourself. However, when in need of parts or major service, be sure to see Beton Trowel. GENERAL •...
Beton Trowel nv UBRICATION ENGINE OIL The long life and successful operation of any piece of machinery is dependent on frequent and thorough lubrication. Before using the trowel, always check your engine for oil. Use proper engine oil as recommended in the engine manufacturer’s manual.
Beton Trowel nv ERVICE Due to the nature and environment of use, power trowels are exposed to severe operating conditions. Some general maintenance guidelines will extend the useful life of your trowel. ❖ The initial service for your power trowel should be performed after 25 hours of use, at which time your mechanic (or authorized repair shop) should complete all of the recommended checks in the schedule above.
Beton Trowel nv 8. S PECIFICATIONS ECHNICAL DATA SHEET MODEL BT120-2/5/PFV35.1 OPERATING WIDTH 2540 MM ENGINE MOTOR Kubota 44HP Turbo LIGHTS & RETARDANT STANDARD SPRAY BLADE SIZE 6 “ X 18 “ FLOAT PAN SIZE 1170 MM WEIGHT 730 KG...
Page 18
Beton Trowel nv Item No. Part No. Description Qty. 1046H0453 SEAT 1046H8018 SIDE PANEL RIGHT 1046H8007 COVER PLATE RIGHT 1046H8200 SEAT SUPPORT 1046H8019 FRONT PANEL UPPER 1046H8016 FRONT PANEL RIGHT 846A040500 THROTTLE PEDAL 1046H4200 PEDAL SUPPORT 1046H4001 THROTTLE LEVER 1046H8406...
Page 37
Gelijkvormighheidscertificaat / Declaracion de Conformidad / Declaracao de Concormidade / Dichiarazione Di Conformita Model : BT120H-2-5-PFK44 We Beton Trowel NV Declare under our sole responsibility that the product to which this declaration relates is in conformity with the following standards or other normative documents.
Need help?
Do you have a question about the BT120H-2/5/PFK44 and is the answer not in the manual?
Questions and answers