Advertisement
DC 3-wire Models
Model
TL-W1R5M#1
Item
Sensing distance
1.5 mm ±10%
Setting distance
0 to 1.2 mm
Differential distance
10% max.
Sensing object
Ferrous metal (refer to Engineering Data for non-ferrous metal on page E-55)
Standard sensing
Iron, 8 x 8 x 1 mm
object
Response frequency 1 kHz min.
Power supply
(Operating voltage
12 to 24 VDC (10 to 30 VDC) ripple (p-p): 10% max.
range)
Current consumption 15 mA max. at 24 VDC (no-load)
Switching
NPN open collector 100 mA max.
capacity
(30 VDC max.)
Control
output
Residual
1 V max. (under load current of
voltage
100 mA with cable length of 2 m)
Indicator lamp
Detection indicator (red LED)
Operating status
(with sensing object
NO
approaching)
Protective circuits
Reverse connection protection, surge absorber
Ambient temperature Operating/Storage: -25°C to 70°^C (with no icing or condensation)
Ambient humidity
Operating/Storage: 35% to 95%RH (with no condensation)
Temperature influ-
±10% max. of sensing distance at 23°C within the temperature range of -25°C and 70°C
ence
±2.5% max. of sensing distance
Voltage influence
within a range of ±10% of rated
power supply voltage
Insulation resistance 50 M
Dielectric strength
1000 VAC 50/60 Hz for 1 min between energized part and case
Vibration resistance
10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s
Protective structure
IEC60529 IP67
Connection method
Pre-wired models (standard length: 2 m)
Weight
30 g
(Packed state)
Case
Heat-resistant ABS resin
Material
Sensing
Heat-resistant ABS resin
surface
Mounting bracket,
Accessories
instruction manual
TL-W
TL-W3M##
3 mm ±10%
0 to 2.4 mm
Iron, 12 x 12 x
1 mm
600 Hz min.
C1 models: NO
C2 type: NC
min. (at 500 VDC) between energized parts and case
2
for 3 times each in X, Y, and Z directions
TL-W5M##
5 mm ±10%
0 to 4 mm
Iron, 18 x 18 x 1 mm
500 Hz min.
300 Hz min.
10 to 30 VDC with a ripple (p-p) of
20% max.
10 mA max.
15mA max. at 24 VDC (no-load)
NPN open col-
lector 12 VDC
50 mA max.
(30 VDC max.)
200 mA
24 VDC 100 mA
max. (30 VDC
max.)
1 V max. (under
load current of
2 V max. (under load current of
50 mA with cable
200 mA with cable length of 2 m)
length of 2 m)
E1 models, F1 models: NO
E2 models, F2 models: NC
±2.5% max.
of sensing dis-
tance within a
±2.5% max. of sensing distance within a range of ±10%
range of ±20%
of rated power supply voltage
of rated power
supply voltage
Approx. 45 g
Approx. 70 g
Diecast aluminum
Instruction manual
TL-W5E#/F#
TL-W20ME#
20 mm ±10%
0 to 16 mm
1% to 15% of
sensing distance
Iron, 50 x 50 x
1 mm
40 Hz min.
12 to 24 VDC (10
to 30 VDC) ripple
(p-p): 10% max.
8 mA at 12 VDC,
15 mA at 24 VDC
12 VDC
100mA max.,
24 VDC
200 mA max.
1 V max. (under
load current of
200 mA with ca-
ble length of 2 m)
Destruction:
500 m/s2 for 10
times each in X,
Y, and Z direc-
tions
Approx. 180 g
Heat-resistant
ABS resin
D-55
Advertisement
