Circuitmess Wacky Robot BiT Instructions Manual page 49

children do not play with any plastic
packaging as there are suffocation risks.
5. Teach children to always store
CircuitMess Bit and other parts of
the CircuitMess Bit educational kit
appropriately to prevent accidents. Do
not leave CircuitMess Bit on stairs or
on the floor in your home or classroom
where someone can step on it.
6. Always report a product security
issue to our customer support
(contact@circuitmess.com)
Declaration of Conformity
CircuitMess d.o.o. declares that this DIY
educational kit CircuitMess Bit model
complies with the essential requirements
and all other relevant provisions of
Directive 2014/53 / EU. The full text
of the EU declaration of conformity
is available at the following Internet
address: circuitmess.com/certification.
Legal Information
This device can be used in all EU
Member States. Check all the national
and local regulations about using the
device. This device may be restricted
for use, depending on local laws.
Manufacturer:
CircuitMess d.o.o.
Ventilatorska cesta 24,
10250 Lučko,
Zagreb,
Croatia
OIB: 50943449035
Proper disposal of this product
WEEE markings on the product indicate
that this product may not be disposed of
with the rest of your household waste in
the EU. To prevent possible damage to
the environment or human health from
uncontrolled waste disposal, recycle the
product responsibly. Recycling promotes
the sustainable reuse of resources. For
more information on the disposal of
electrical and electronic equipment, don't
hesitate to contact your local household
waste disposal service, the store where
you purchased the kit, or our customer
support (contact@circuitmess.com).
IMPORTANT! Warranty conditions:
The warranty is valid only if the
original invoice is attached to the
product as proof of purchase during
the complaint. If the customer sends
the product for repair for any reason
not covered by the warranty, the
customer may be charged for inspection
and testing and delivery costs.
WARRANTY STATEMENT
CircuitMess d.o.o., with its registered
office in Zagreb, Croatia, Ventilatorska
cesta 24, guarantees the quality and
proper functionality of the components
that come in the CircuitMess Bit DIY
educational kit for a duration of 24
months from the date of purchase.
If the assembled device does not work
correctly due to defects in supplied parts
or electronic components supplied in
the CircuitMess Bit DIY educational kit,
CircuitMess d.o.o. will repair the product
or send an equivalent replacement
product at their own expense.
In case you are experiencing assembly
or functionality difficulties with your
device, please contact us via email
(contact@circuitmess.com).
Please include a detailed
description of the problem.
If you are sending the product to a
repair shop, it is recommended to
deliver the product in the original
packaging to protect it from potential
damage during transportation.