Circuitmess Wacky Robot BiT Instructions Manual page 47

Thank you for purchasing
CircuitMess Bit.
For more information and detailed
instructions on assembling and using
your device, visit our official website:
circuitmess.com/resources/guides
Important safety information
for CircuitMess Bit
Read all safety information
before using the device.
WARNING: Failure to follow these
safety instructions could result in fire,
electric shock, injury, and damage
to your device or other objects.
Read all safety information before
assembling and using this device.
This product is a do–it–yourself
device, and for it to work properly,
you must assemble it according to the
instructions you'll find on our website.
If you are a minor, assemble it
only under an adult's supervision
to avoid potential risks.
CircuitMess Bit contains sensitive
electronic components. CircuitMess Bit
or its components may be damaged if
dropped, burned, punctured, crushed,
or in contact with liquid. If you suspect
that any part of your CircuitMess
Bit kit (especially the batteries) is
damaged, stop using the device. Using
a damaged device may cause injury.
Use only authorized accessories
compatible with your device
and/or the supplied tools.
The device's operating temperature
ranges from 0 ° C ~ 40 ° C.
Using this device in conditions
outside this temperature range
may damage the device.
Please turn off CircuitMess Bit after use
and store it in a safe and dry location.
The included battery must be recycled
appropriately and/or disposed of
separately from household waste.
Improper handling of batteries can cause
a fire or explosion. Dispose of or recycle
your device, battery, and accessories
according to local regulations.
The included battery is
NOT rechargeable.
• Do not short–circuit the battery
• Improper use of the battery can cause
overheating, burns, or other injuries.
• Do not leave the battery directly
exposed to intense sunlight.
• Do not use the device or the battery
in high–temperature conditions.
Overheating may cause an explosion.
• Do not disassemble or damage the
battery to avoid battery leakage,
overheating, or explosion.
• In the case of deformation, stop
using the battery immediately
and dispose of it properly.
• If you are not sure whether your device
or the included battery is safe to use,
turn off the device, put it in a safe place,
and contact our customer support via
email at contact@circuitmess.com.
Keep the device dry.
Do not attempt to repair the
device by yourself.
If any part of the device does not work
correctly, contact our customer support
(contact@circuitmess.com) or take
your device to a certified repair shop.