Mode d’emploi SÈCHE-LINGE Table des matières Informations importantes, 2-3 Installation, 4 Où placer votre sèche-linge ? Français,1 Italiano,37 Deutsch,19 Ventilation Raccords électriques Mise à niveau du sèche-linge Avant d’utiliser votre sèche-linge Description du sèche-linge, 5 Ouverture du hublot English,55 Fonctions Tableau de commande Affichage, 6 Démarrage et programmes, 7-12...
Informations importantes Pour que votre sèche-linge à condensation Si vous ne nettoyez pas le filtre après chaque cycle fonctionne correctement, vous devrez respecter les de séchage, les performances de votre machine consignes d’entretien suivantes : peuvent s’en trouver réduites. Le séchage peut être plus long et la consommation électrique plus Filtre à...
Page 3
Filtre de la pompe à chaleur – Pour un bon fonctionnement, il faut nettoyer le filtre tous les cinq cycles de séchage ; pour optimiser les performances de séchage et réduire la consommation d’énergie, il est toutefois con- seillé de nettoyer le filtre après chaque cycle de séchage.
Installation Où placer votre sèche-linge ? Raccords électriques Veillez à effectuer les opérations suivantes avant d’introduire la • Placez le sèche-linge à une di- fiche dans la prise électrique : stance suffisante des cuisinières à gaz, cuisinières, réchauds • Vos mains doivent être sèches. et tables de cuisson car les •...
Description du sèche- linge Ouvrir la porte Fonctions Modèle et Plaque numéro de Tirez sur la signalétique série poignée Collecteur d’eau Filtre Arrivée d’air Pompe à chaleur (capot ouvert) Pieds Poignée du couvercle réglables de la pompe à chaleur (Tirer pour ouvrir) Tableau de commande Témoin de progression...
Affichage L’écran se compose de trois parties avec un bouton pour chacune. Programmes Automatiques Lorsque vous sélectionnez un programme avec l’option Séchage par sonde, appuyez et relâchez le bouton jusqu’à ce que la sensibilité de la sonde de séchage s’affiche. Si l’option n’est pas disponible, l’affichage clignote et vous entendrez trois bips.
Démarrage et programmes Sélection d’un programme pour redémarrer le séchage. Si vous ouvrez la porte pour vérifier l’état de séchage du linge vous provoquerez un prolongement 1. Raccordez le sèche-linge à la prise électrique. des cycles de séchage, car le compresseur du condensateur 2.
Page 8
Programmes spéciaux Chemises - Haute température • Ce programme est conçu pour les chemises en coton. • Le programme peut être utilisé pour une lessive de 3 kg (environ 12 chemises). • La durée de ce programme dépendra du poids de la charge de linge, du degré de séchage sélectionné et de la vitesse d’essorage utilisée lors du lavage.
Page 9
Rafraîchissement Grâce à un courant d’air frais, l’oxygène pénètre dans les fibres et élimine les odeurs désagréables telles que les odeurs de tabac, de friture et de pollution. Grâce à ce programme court, vous pouvez facilement rafraîchir vos vêtements en tout juste 20 minutes. ! Ce programme sert à...
Tableau de programmes Si le témoin Marche/Arrêt n’est pas allumé, appuyez sur le bouton Marche/arrêt et sélectionnez le programme. Programme Fonction Réglage Remarques / Options disponibles Programme court (environ Il ne s’agit pas d’un programme de séchage (voir page pré- 1.
Page 11
Programme Fonction Réglage Remarques / Options disponibles Sèche vos vêtements en Alarme ou Antifroissage . Départ Différé 1. Placez le bouton PROGRAMME sur coton ou synthétique plus 2. Sélectionnez les options nécessaires. Température Elevéè rapidement. 3. Appuyez sur la touche Marche/Pause Séchage Rapide Sèche vos vêtements de...
Démarrage et programmes Commandes • High Heat Lorsqu’une durée de séchage a été sélectionnée, cette tou- • Bouton Programme che permet de sélectionner le séchage à haute température Attention ! Si après avoir appuyé sur le bouton Démarrer, et le témoin situé au-dessus de la touche s’allume. la position du bouton de programme a changé, la nouvelle position NE MODIFIERA PAS le programme sélectionné.
Linge Trier votre linge Conseils de lavage Consultez les étiquettes présentes sur vos vêtements, sur- • Vérifiez les symboles présents sur les étiquettes des tout si vous les séchez pour la première fois au sèche-linge. vêtements pour vous assurer que les articles peuvent être Les symboles suivants sont les plus courants : séchés au sèche-linge.
Vêtements spéciaux • Quantité de linge : les vêtements seuls ou les petits volumes peuvent mettre plus longtemps à sécher. Couvertures et dessus de lits : les articles en acrylique (Aci- • Sécheresse : si vous comptez repasser certains de vos lan, Courtelle, Orion, Dralon) doivent faire l’objet d’un séchage vêtements, ils peuvent rester légèrement humides.
Avertissements et suggestions ! Cet appareil a été conçu et construit conformément à des ticles contenant de l’huile peuvent prendre feu spontanément, normes de sécurité internationales.Ces avertissements sont particulièrement lorsqu’ils sont exposés à des sources de donnés pour des raisons de sécurité et doivent être suivis chaleur comme un sèche-linge.
Entretien et nettoyage Mise hors tension Nettoyage du groupe filtre de la pompe à chaleur Débranchez le sèche-linge lorsque vous ne l’utilisez pas, • Périodiquement, tous les 5 cycles, retirer le filtre de la lorsque vous le nettoyez et lors de l’entretien. pompe à...
Dépannage Votre appareil semble ne pas fonctionner correctement ? Avant de contacter votre réparateur agréé (voir Réparation), parcourez les quelques pages suivantes. Problème : Causes possibles/Solutions : Le sèche-linge ne démarre pas. • L’appareil n’est pas branché dans la prise de courant ou il n’est pas suffisamment branché...
Réparation Système à pompe à chaleur Quels sont les éléments dont le réparateur a besoin : Ce sèche-linge est équipé d’un système à pompe à chaleur • Nom, adresse et code postal ; pour sécher votre linge. Pour son fonctionnement, la pompe •...
Page 19
Gebrauchsanweisung WÄSCHETROCKNER Inhaltsverzeichnis Wichtige Informationen, 20-21 Aufstellung, 22 Deutch Aufstellungsort des Wäschetrockners Belüftung Wasserablauf Elektroanschluss Reinigung Wärmepumpenfilter Allgemeine Informationen Beschreibung des Wäschetrockners, 23 Öffnung der Gerätetür Merkmale Bedienblende Display, 24 Start und Programme, 25-30 Programmwahl AQUALTIS Spezialprogramme Programmtabelle Schaltelemente AQC8 1F7 Wäsche, 31-32 Unterteilung der Wäsche Etiketten mit Pflegehinweisen...
Wichtige Informationen Für den leistungstüchtigen Betrieb des Die fehlende Reinigung des Flusensiebs nach Kondensationstrockners ist das nachfolgend jedem Trockenzyklus beeinflusst die Leistung angeführte Wartungsschema zu befolgen: des Geräts, das mehr Zeit zum Trocknen benötigt und somit während des Trocknens mehr Strom Flusensieb –...
Page 21
Wärmepumpenfilter – Für einen ordnungsgemäßen Betrieb muss der Filter alle fünf Trockenzyklen gereinigt werden. Um die Trockenleistung zu optimieren und um einen geringeren Energieverbrauch zu erzielen, wird empfohlen, den Filter nach jedem Trockenzyklus zu reinigen. Phase 1 Den Deckel der Wärmepumpe öffnen.
Aufstellung Aufstellungsort des Wäschetrockners Elektroanschluss Bevor Sie den Stecker in die Steckdose stecken, folgende • Hitze kann den Trockner Prüfungen ausführen: beschädigen; deshalb entfernt • Vergewissern Sie sich, dass Ihre Hände trocken sind. von Gasherden, Öfen, Heizkör- • Die Steckdose muss geerdet sein. pern oder Kochfeldern platzieren.
Beschreibung des Wäschetrockners Öffnung der Gerätetür Merkmale Modell und Seriennummer Typenschild mit Den Griff Betriebsdaten ziehen Wasserauffangbehälter Flusensieb Gitter der Belüftungsöffnung Wärmepumpe (offener Deckel) Griff Deckel Wärmepumpe (zum Öffnen ziehen) Verstellbare Füße Bedienblende Kontrollleuchte ECO Tasten und Taste und Taste und Kontrollleuchten für Anzeigenleuchte Kontrollleuchte...
Display Das Display verfügt über drei Abschnitte, jeweils mit entsprechender Taste. Automatisches Trocknen Nach der Wahl eines Programmes, das über die Option Automatisches Trocknen verfügt, die Taste mehrmals drü- cken, bis die gewünschte Trockenstufe angezeigt wird. Falls die Option Automatisches Trocknen nicht verfügbar ist, leuchtet das Display auf und Sie hören drei Signaltöne.
Start und Programme Programmwahl des Trockenprogramms können Sie die Wäsche überprüfen und Kleidungsstücke entfernen, die bereits trocken sind, während die 1. Fügen Sie den Stecker des Wäschetrockners in die Netzsteckdose. anderen weiter getrocknet werden. Nachdem Sie die Tür geschlos- 2. Wählen Sie die Wäsche auf der Basis des Wäschetyps aus sen haben, START drücken, um die Maschine erneut in Betrieb (siehe Wäsche).
Page 26
Spezialprogramm Programme für Hemden Hemden und Blusen - Option Intensivtrocknen • Dieses Programm ist für Hemden und Blusen aus Baumwolle vorgesehen. • Es kann für Füllmengen bis zu 3 kg verwendet werden (etwa 12 Hemden oder Blusen). • Die Programmdauer hängt von der Füllmenge, der ausgewählten Trockenstufe und der Schleuderdrehzahl Ihrer Waschmaschine ab. •...
Page 27
Auffrischen Dieses Programm dient zum Trocknen von Wäsche und Säuglingsbettwäsche (aus Baumwolle und Chenille) und von Feinwäsche, z. B. aus Acryl. ! Das Auffrischprogramm ist zur Lüftung der Wäsche gedacht, nicht zum Trocknen: verwenden Sie es also nicht mit nassen Wäschestücken.
Programmtabelle Falls die Kontrollleuchte On/Off nicht aufleuchtet, die entsprechende Taste drücken und anschließend das Programm wählen. Programm Funktion Ausführung Hinweise / Verfügbare Zusatzfunktionen Kurzprogramm (etwa 10 1. Den PROGRAMM-Schalter auf stellen. Dies ist kein Trockenprogramm (siehe vorherige Minuten), das die Fasern der 2.
Page 29
Programm Funktion Ausführung Hinweise / Verfügbare Zusatzfunktionen Trocknet Kleidung Alarm oder Knitterschutz . Startvorwahl 1. Den PROGRAMM-Schalter auf stellen. aus Baumwolle oder . Hohe Temperatur 2. Wählen Sie ggf. die erwünschten Zusatzfunktionen. Kunstfasern schneller. 3. Die Taste Start/Pause drücken . Schnelltrocknen Trocknet Sportkleidung.
Schaltelemente • Hohe Temperatur Durch Drücken dieser Taste bei der Auswahl der Trocken- • Programmwählschalter Achtung: Falls sich nach dem Drücken der Starttaste die zeit wird die Funktion Intensivtrocknen ausgewählt und die Position des Programmwählschalters verändert hat, ändert Kontrollleuchte über der Taste leuchtet auf. die neue Position NICHT das gewählte Programm.
Wäsche Unterteilung der Wäsche Etiketten mit Pflegehinweisen • Kontrollieren Sie die auf den Etiketten der verschiedenen Kontrollieren Sie die Etiketten der Kleidungsstücke, beson- Wäscheteile angeführten Symbole, um sicherzustellen, ders wenn Sie diese zum ersten Mal in den Wäschetrockner dass die Teile für einen Trommeltrockner geeignet sind. geben.
Besondere Wäscheteile • Trocknung: Kleidungsstücke, die gebügelt werden müs- sen, können aus dem Gerät genommen werden, wenn sie noch etwas feucht sind. Teile, die vollkommen trocken sein Decken und Tagesdecken: Teile aus Kunstfaser (Acilian, müssen, können hingegen länger im Trockner bleiben. Courtelle, Orion, Dralon) müssen mit besonderer Aufmer- ksamkeit bei niedriger Temperatur getrocknet werden.
Hinweise und Empfehlungen ! Dieses Haushaltsgerät wurde unter Beachtung der inter- Wasser gewaschen wurden, stellen ein Brandrisiko dar. nationalen Sicherheitsnormen geplant und hergestellt. Die • Keine Wäsche trocknen, die mit Chemikalien behandelt nachfolgenden Hinweise werden aus Sicherheitsgründen wurde. geliefert und sind aufmerksam zu beachten. •...
Pflege und Wartung Abschalten vom Stromnetz Prüfen Sie immer den Wasserauffangbehälter und entleeren Sie ihn, bevor Sie ein neues Trockenprogramm starten. Trennen Sie den Wäschetrockner von der Stromversorgung, wenn er nicht in Betrieb ist sowie während Reinigungs- und Reinigung Wärmepumpenfiltereinheit Wartungsarbeiten.
Fehlersuche Sollten Sie das Gefühl haben, dass Ihr Wäschetrockner nicht vorschriftsmäßig arbeitet, dann konsultieren Sie bitte die nachfolgende Tabelle, bevor Sie sich an ein Kundendienstzentrum (siehe Kundendienst) wenden. Störung: Mögliche Ursachen / Abhilfen: • Der Netzstecker steckt nicht fest genug in der Steckdose, um den Kontakt herzustellen. Der Wäschetrockner setzt sich nicht •...
Kundendienst Wärmepumpensystem Geben Sie hierbei folgende Daten an: • Name, Adresse und Postleitzahl Dieser Trockner ist mit einem Wärmepumpensystem zum • Telefonnummer Trocknen Ihrer Wäsche ausgestattet. Diese Wärmepumpe • Art der Störung nutzt ein vom Kyoto-Protokoll erfasstes Treibhausgas • das Kaufdatum (Kühlmittel).
Page 37
Istruzioni per l’uso ASCIUGATRICE Indice Informazioni importanti, 38-39 Installazione, 40 Dove installare l’asciugatrice Italiano Aerazione Collegamento elettrico Livellamento dell’asciugatrice Informazioni preliminari Descrizione dell’asciugatrice, 41 Apertura dello sportello Caratteristiche Pannello comandi Display, 42 Avviamento e programmi, 43-48 Scelta del programma Programmi speciali AQUALTIS Tabella dei programmi Comandi...
Informazioni importanti Per un funzionamento efficiente dell’asciugatrice a La mancata pulizia del filtro dopo ogni ciclo condensazione è necessario seguire lo schema di di asciugatura influisce sulle prestazioni di manutenzione regolare indicato qui sotto: asciugatura della macchina, che impiega più tempo ad asciugare e, di conseguenza, consuma più...
Page 39
Filtro del Condensatore - Per un corretto funzionamento il filtro deve essere pulito ogni cinque cicli di asciugatura; tuttavia, per ottimizzare le prestazioni di asciugatura, e per ottenere il minor consumo energetico, ti raccomandiamo di pulire il filtro al termine di ogni ciclo di asciuigatura. Fase 1 Aprire il coperchio del Condensatore.
Installazione Dove installare l’asciugatrice Collegamento elettrico Prima di inserire la spina nella presa elettrica verificare quanto • Le fiamme possono danneggiare segue: l’asciugatrice, che deve pertanto • Accertarsi che le mani siano asciutte. essere installata lontano da cucine a gas, stufe, termosifoni o piani •...
Descrizione dell’asciugatrice Apertura dello sportello Caratteristiche Modello e Targhetta dei dati di Numero di esercizio serie Tirare la maniglia Contenitore di raccolta dell’acqua Filtro Condensatore (coperchio aperto) Griglia della presa d’aria Maniglia coperchio del Condensatore (tirare per aprire) Piedini regolabili Pannello comandi Spia Pulsante e...
Display Il Display è dotato di tre sezioni, ciascuna con il relativo pulsante. Asciugatura automatica Dopo avere scelto un programma dotato dell’opzione Asciugatura automatica, premere più volte il pulsante finché non viene visualizzato il livello di asciugatura automatica desiderato. Se l’opzione di asciugatura automatica non è disponibile, il display lampeggia e vengono emessi tre segnali acustici.
Avvio e programmi Scelta del programma che si sono asciugati lasciando continuare gli altri. Dopo avere richiuso lo sportello, premere AVVIO per mettere di nuovo in 1. Inserire la spina dell’asciugatrice nella presa di alimentazione funzione la macchina. elettrica. Se apri lo sportello per verificare lo stato di asciugatura dei 2.
Page 44
Programmi speciali Camicie - Alta Temperatura • Questo programma è dedicato alle camicie realizzate in cotone. • Può essere usato per carichi fino a 3 kg (circa 12 camicie). • La durata di questo programma dipenderà; dalla dimensione del carico, dal livello di asciugatura selezionato e dalla velocità di centrifuga utilizzato nel lavaggio •...
Page 45
Rinfresca tessuti Grazie ad un flusso di aria fresca, l’ossigeno penetra nelle fibre e rimuove dagli indumenti gli odori spiacevoli, come il fumo di sigaretta, l’odore di fritto e lo smog. Con questo breve programma è possibile rinfrescare gli indumenti in soli 20 minuti. ! Il programma per aerare i capi non è...
Tabella dei programmi Se la spia On/Off non è accesa premere il relativo pulsante , quindi scegliere il programma. Programma Funzione Impostazione Note / Opzioni disponibili Programma breve (circa 10 1. Posizionare la manopola PROGRAMMI su Non è un programma di asciugatura (vedi la pagina minuti) che ammorbidisce le 2.
Page 47
Programma Funzione Impostazione Note / Opzioni disponibili Asciuga i capi in cotone o Allarme o Anti Piega . Partenza ritardata . Alta 1. Posizionare la manopola PROGRAMMI su fibre sintetiche più rapida- Temperatura 2. Selezionare le eventuali opzioni richieste. mente. 3.
Comandi • Alta Temperatura Se viene selezionata un’asciugatura a tempo, premendo • Manopola dei programmi questo pulsante si seleziona una temperatura alta e la spia Attenzione: se dopo avere premuto il pulsante di avvio sopra ad esso si accende. la posizione della manopola dei programmi è cambiata, la nuova posizione NON modifica il programma selezionato.
Bucato Suddivisione del bucato Etichette di manutenzione • Controllare i simboli riportati sulle etichette dei vari capi Controllare le etichette dei capi, specialmente quando questi per verificare che i capi possano essere sottoposti ad vengono inseriti per la prima volta in asciugatrice. Di seguito asciugatura a tamburo.
Capi particolari • Asciugatura: se i capi devono essere stirati possono essere estratti dalla macchina quando sono ancora un po’ umidi. I capi che devono essere completamente asciutti Coperte e copriletto: i capi in acrilico (Acilian, Courtelle, possono invece essere lasciati più a lungo. Orion, Dralon) devono essere asciugati con estrema cura a temperatura bassa.
Avvertenze e suggerimenti lavati con acqua, determina il pericolo di incendio. Questo elettrodomestico è stato progettato e realizzato nel • Non caricare nell’asciugatrice capi precedentemente rispetto delle normative internazionali in materia di sicurezza. trattati con prodotti chimici. Queste avvertenze vengono fornite per motivi di sicurezza e •...
Cura e manutenzione Interruzione dell’alimentazione elettrica Controllare sempre il contenitore di raccolta e svuotarlo prima dell’avvio di un nuovo programma di asciugatura. Scollegare l’asciugatrice quando non è in funzione, nonché durante le operazioni di pulizia e di manutenzione. Pulizia dell’unità Filtro del Condensatore Pulizia del filtro dopo ogni ciclo •...
Problemi e soluzioni Nel caso in cui si abbia la sensazione che l’asciugatrice non funzioni in modo corretto, prima di telefonare al Centro di assistenza (vedi Assistenza) consultare attentamente i seguenti suggerimenti per la soluzione dei problemi. Problema: Cause probabili / Soluzioni: L’asciugatrice non parte.
Assistenza Sistema a Condensatore Dati da comunicare al Centro di assistenza: Questo asciugature è dotato di un sistema a Condensatore • Nome, indirizzo e codice postale; per asciugare i tuoi capi. Per consentire il suo • numero di telefono; funzionamento, il Condensatore utilizza gas ad effetto serra •...
Page 55
Instruction booklet TUMBLE DRYER Contents Important Information, 56-57 Installation, 58 Where to put your dryer English Ventilation Electrical connection Levelling the tumble dryer Before you start using your dryer Dryer Description, 59 Open the door The Features Control Panel The Display, 60 Start and Programmes, 61-66 Choosing a Programme AQUALTIS...
Important Information Failure to clean the filter after every drying cycle will For your Condenser dryer to operate efficiently, affect the drying performance of your machine – It you must follow the regular maintenance schedule will take longer to dry and as a result will use more shown below: electricity during drying.
Page 57
Heat Pump Filter Unit - You must clean the fluff from the filter every five drying cycles to maintain the correct functioning of your dryer ! However for optimum performance and to save energy we recommend that it is cleaned before each drying cycle.
Installation Electrical connection Where to put your dryer Before plugging the appliance into the socket, check the fol- • Place your dryer at a distance lowing: from gas ranges, stoves, heaters, or cooktops because flames • Make sure your hands are dry. can damage the appliance.
Dryer Description The Features To open door Rating Plate Model Pull on handle & Serial Numbers Water container Filter Heat Pump Filter Unit Air Intake (cover open) Grille Heat Pump Filter Unit cover handle (Pull here to open) Ajustable feet (to level dryer) Control Panel Start/Pause...
The Display The Display has three sections each with its corresponding button. Sensor Dry After selecting a programme that has a Sensor Dry Option, press and release the button until the required dryness sensing level is displayed. If the sensing option is not available the display will flash and the buzzer beeps three times.
Start and Programmes Choosing a Programme START in order to resume drying. If you open the door to check your laundry you will extend the 1. Plug the dryer into the electrical socket. drying time as the heat pump compressor will not start until 5 2.
Page 62
Special Programmes Shirts - High Heat option • This is a programme for Shirts made from Cotton. • It can be used for load sizes up to 3 kg (approximately 12 shirts). • The duration of this programme will depend on the size of the load, the dryness setting selected and the spin speed used in your washer.
Page 63
Refresh Thanks to a cool air flow, oxygen penetrates the fibers and transports unpleasant odors such as cigarette smoke, frying, smog out of the clothes. With this short program, you can easily refresh your garments in just 20 minutes. ! Airing is not a drying programme and should not be used for wet articles of clothing. •...
Page 64
Programmes Table If the On/Off light is not lit; Press the On/Off Button and then select programme. Programme What it does How to set it Notes / Options available Brief programme (approxima- 1. Position the PROGRAMME knob on ! This is not a drying programme (see previous page). tely 10 minutes) that softens Options available 2.
Page 65
Programme What it does How to set it Notes / Options available Dries your sports clothes. Sound or Crease care . Delay Start 1. Position the PROGRAMME knob on 2. Select any Options if required. 3. Press the Start Button Activewear Dries your cuddly toy.
Page 66
The Controls “h2o” • Empty Water Clean Filter Light (If you have plumbed your dryer to a drain the light can be • Programme knob ignored for the water bottle, as there is no need to empty the Warning, if after pressing the start button the programme water container).
Laundry Sorting your laundry Wash care labels • Check symbols on clothing labels to make sure that the Look at the labels on your garments, especially when tumble articles can be tumble dried. drying for the first time. The following symbols are the most •...
Special clothing items • Dryness: if you are going to iron some of your clothes, they can be taken out while still a bit damp. Others can be left longer if you need them to be completely dry. Blankets and bedspreads: acrylic items (Acilian, Courtelle, Orion, Dralon) must be dried with special care on a low heat •...
Warnings and Suggestions This appliance has been designed and built according to To minimise the risk of fire in your tumble dryer, the international safety standards. These warnings are given for following should be observed: safety reasons and must be followed carefully. •...
Maintenance and Care Switching off the electricity Always check and empty the container before you start a new drying programme. Unplug the dryer when not using it, when cleaning it, and Cleaning the Heat Pump Filter Unit during maintenance activities. •...
Troubleshooting One day your dryer seems not to be working. Before you call your Service Centre (see Service), go through the following troublesho- oting suggestions. Problem: Possible causes / Solutions: The dryer won’t start. • The plug is not plugged into the socket, or not making contact. •...
Service 04/2013 - Xerox Fabriano Heat Pump System What to tell the Service Centre: This dryer is fitted with a sealed heat pump system to dry • Name, address, and post code; your clothes. To operate, the heat pump contains fluorinated •...
Need help?
Do you have a question about the AQUALTIS AQC8 1F7 and is the answer not in the manual?
Questions and answers