Yealink W60B for Setup Manual

YEALINK W60B
You will find a Quick start guide in the box for
your phone to guide you through how to setup
the device with the correct connections.
Once you have connected your base (W60B) to your router and
powered your phone on for the first time, you will see the
screen shown to the right.
Additional handsets
If you have ordered additional phones to work
through your W60B, you will first need to register
these to the base.
When you power the additional phones
on you will see the screen to the right;
On the bottom left of the screen, you
will have the option for Reg.
Once this is pressed you will see a
search bar appear on the screen.
Press the button on the base of the
W60B for 2 seconds.
After the first time you connect the base to the
internet, it will search for an update automatically.
You will see the lights coming on in sequence from the bottom
upwards.
When the update is being applied you will see the lights flashing
randomly before they all turn off. This normally takes around five
minutes and once it is completed, you will be able to make outgoing
calls from your new phone.
Once the lights have come back on, your phone will have updated and
your service will be live.