Table of Contents
Advertisement
Edge Position
2-17-1
Selecting Measurement Images
2-17-(3)
This section describes how to select an image stored at either Image 0 or
Image 1 as the image for measurement.
1.
Select Edge position.
0.Scn 0=SET=
0.Camera image
1.Edge position
2.
ENT:Set SFT+ESC:Edit
The setting selections will be displayed.
1.Edge position
2.
Select Measurement Image.
The selections will be displayed.
Measurement image
Image0
Image1
3.
Select which image will be used for measurement, the image stored at Im-
age 0 or the image stored at Image 1.
4.
Press the ENT Key.
The settings will be registered and the screen in (1.) will return.
Measurement image
Select region
Coordinate mode
Section 2-17
Advertisement
Chapters
Table of Contents
