Restore Image With Usb Stick - Omron DYALOX INDUSTRIAL PC Quick Start Manual

4.2.2 Clear Failure(s)
Most failures will automatically be removed from the Main RAS window, however some
monitoring failures will remain visible even if the original failure has been resolved already.
You can manually clear the RAS errors when the failure itself has been resolved.
To do this, follow the instructions below.
1. Click "Clear Failure-detected Mode" in "Action" menu.
2. The following confirmation dialog box appears:
3. Click the "OK" button to clear the Failure(s) detected.
4. You can confirm the current monitoring status in the Main window or
Summary/Information window.

5. Restore image with USB stick

In the same box where you found this manual, you will also find a USB stick.
This USB stick acts like a Startup disk so that you can boot the DyaloX IPC with this USB
stick. For this it is necessary that you configure in the BIOS to boot from the USB stick first
else it will just boot from the default disk.
To do this, follow the steps below:
1. Boot the DyaloX IPC
2. When you see the message "Press <F2> to enter SETUP", press F2
3. Select the "Boot" menu
4. Select "Hard Drive" and press Enter
5. Now you see a list of drives. In this list you should also see the SanDisk USB stick.
Select the SanDisk entry and move the SanDisk drive above the InnoDisk drive by
pressing the plus (+) key.
6. Select the "Exit" menu and choose "Exit Saving Changes". Confirm saving changes.
7. The DyaloX IPC will now reboot and show the Windows Startup Menu.
The USB stick contains some Windows startup files and a free tool to restore and save a disk
image. This tool is provided free of charge and Omron is not liable for any damaged caused
by using this tool. It is advised that when you need more than this basic functionality, that you
buy a commercial imaging tool, like Acronis or Norton Ghost.
From the Microsoft Windows Startup Menu you can choose to save or restore a disk image.
See the About option for more information about the tool.
The image file that will be restored is located on the USB stick and when you create an image
it will also be saved to the USB stick by default. It is advised that you create a backup of this
USB stick.
!
21