Omron CX-SUPERVISOR - SCRIPT REFERENCE REV2.0 Reference Manual page 87

CHAPTER 6 – Functions and Methods
Remarks
Argument
returnstate
TController
mode
Typical Example
temp1 = TCRspLsp("e5ak",temp2)
Note: This command was previously called TCSetpoint.
TCRunStop
Syntax
returnstate = TCRunStop(TController,mode)
Remarks
Argument
returnstate
TController
mode
Typical Example
temp1 = TCRunStop("e5ak",temp2)
Note: This command was previously called TCModeShift.
TCSaveData
Syntax
returnstate = TCSaveData(TController)
Page 74
Type
Bool Returnstate is '1' if the function is successful, or '0' otherwise.
String This is a string representing the name of the temperature
controller.
Point This is a point depicting the mode of operation and defines the
setpoint mode used by the temperature controller.
0: This specifies remote setpoint mode.
1: This specifies local setpoint mode.
Type
bool Returnstate is '1' if the function is successful, or '0' otherwise.
string This is a string representing the name of the temperature
controller.
point This is a point depicting the mode of operation and defines
either auto-output mode shift or manual output mode shift.
0: This specifies manual output mode shift.
1: This specifies auto-output mode shift.
Description
Description
Revision 2.0
OMRON