Other Objects - Omron CX-SUPERVISOR - SCRIPT REFERENCE REV2.0 Reference Manual

OMRON
References
Refer to:
♦
Chapter 6, Blink for use of the blink command.
♦
Chapter 6, Colour for use of the colour command.
♦
Chapter 6, Disable for use of the disable command.
♦
Chapter 6, Height for use of the height command.
♦
Chapter 6, Horizontal Fill for use of the horizontal fill command.
♦
Chapter 6, Move for use of the move command.
♦
Chapter 6, Rotate for use of the rotate command.
♦
Chapter 6,Vertical Fill for use of the vertical fill command.
♦
Chapter 6, Visible for use of the visible command.
♦
Chapter 6, Width for use of the width command.
♦
The CX-Supervisor User Manual for details of the Animation Editor.

Other Objects

Syntax
objectname.objectcommand
pagename.objectname.objectcommand
Remarks
Argument
objectname
objectcommand
Revision 2.0
This is the name of the object. The object is provided with a generic name on
creation, which can be amended later to something more meaningful. The
script is automatically updated following any amendment to the object name.
This can be made up of the following commands, which are described in
chapter 6, Object Commends:
•
Blink command
•
Colour command.
•
Disable command.
•
Visible command.
•
Move command.
•
Rotate command.
•
Vertical fill command.
•
Horizontal fill command.
•
Height command.
•
Width command.
The content of the commands are made up arithmetical or logical expressions,
x and y co-ordinates, or references, varying between commands. The colour
command requires a colour identifier.
CHAPTER 6 – Functions and Methods
Description
Page 39