TABLE OF CONTENTS INTRODUCTION .................................. 3 ABOUT THIS MANUAL ..............................3 ELATEC SUPPORT ................................3 REVISION HISTORY ..............................3 INTENDED USE .................................. 3 SAFETY INFORMATION ..............................4 TECHNICAL DATA ................................5 MODE OF OPERATION ..............................6 OPERATING MODE ...............................6 POWER UP ..................................6 ENUMERATION ................................6 INITIALIZATION ................................6...
2 INTENDED USE The TWN4 MultiTech 2 BLE reader has integrated RFID (LF & HF) and Bluetooth Low Energy (BLE), which is supported by mobile phones with Android version 4.3 or greater, iOS 8.0 or greater and PCs with Windows (new Bluetooth hardware integrated). The app on the reader communicates with the BLE module with easy commands and has direct enhancement to the GATT structure, which gives you the flexibility to write your custom apps.
The user is liable for the use of spare parts or accessories other than the ones sold or recommended by ELATEC. ELATEC is not responsible for any damage or injuries resulting from the use of spare parts or accessories other than the ones sold or recommended by ELATEC.
If you are unsure about any part of the safety information above, contact ELATEC support. Any failure to observe the safety information above will be considered misuse and will void the warranty. ELATEC is not responsible for any damage or injuries resulting from any misuse of the product.
Short-circuit current < 8 A Once TWN4 MultiTech 2 BLE is connected to the host, it detects the type of communications cable (e.g. USB or RS-232), with which it is connected to the host. In case of RS-232: Additionally, the RS-232 is sending a version string via RS-232 to the host.
6 COMPLIANCE STATEMENTS TWN4 MultiTech 2 BLE is in compliance with the EU directives and regulations as listed in the respective declaration of conformity (cf. TWN4 MultiTech 2 EC Declaration of Conformity). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
6.10 UNITED KINGDOM TWN4 MultiTech 2 BLE complies with the requirements of the UK legislations and other regulations as listed in the respective UKCA declaration of conformity. The importer is responsible for applying the following information to the packaging of the product: •...
Page 11
Elatec reserves the right to change any information or data in this document without prior notice. Elatec declines all responsibility for the use of this product with any other specification but the one mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification.
Need help?
Do you have a question about the TWN4 MULTITECH 2 BLE and is the answer not in the manual?
Questions and answers