Page 1
Be familiar with the controls and the proper usage of the equipment. Save these instructions. Related Manuals: 308491 DutyMax DH/GH230 Gun 334654 Pump 309495 DutyMax GH300 Gun 310812 Electric Motor ti25306a ti25305a Standard Series ProContractor Series Use only genuine Graco replacement parts. The use of non-Graco replacement parts may void warranty.
Page 2
Technical Data ..........64 DutyMax EH230 HD Standard Series ........64 DutyMax EH300 HD Standard Series .
Page 3
Clean Up Clean Up Turn motor switch ON or turn engine ON and start engine. Turn hydraulic pump valve ON. Turn prime valve forward to SPRAY position. Perform Pressure Relief Procedure, page 15. Remove Guard and SwitchTip. ti8687a Remove displacement pump from paint and place in flushing fluid.
Page 4
Clean Up Move gun to waste pail, hold gun against Engage trigger lock. Remove filters from pail, trigger gun to thoroughly flush gun and sprayer, if installed. Clean and system. Release trigger and engage inspect. Reinstall filters. trigger lock. ti15018a ti8692a 10.
Graco’s written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts.
For the latest information about Graco products, visit www.graco.com. For patent information, see www.graco.com/patents. TO PLACE AN ORDER, contact your Graco distributor or call 1-800-690-2894 to identify the nearest distributor. All written and visual data contained in this document reflects the latest product information available at the time of publication.
Need help?
Do you have a question about the DutyMax EH230 HD and is the answer not in the manual?
Questions and answers