Installing The Wlan Card; Removing The Drive Cage - Dell OptiPlex 9010 Small Form Factor Owner's Manual

Installing The WLAN Card

1. Insert the WLAN card into the connector on the system board and press down until it is securely in place. Fix the
latch.
2. Place the antenna puck on the connector and tighten the screws that secure it to the computer.
3. Install the cover.
4. Follow the procedures in After Working Inside Your Computer.

Removing the Drive Cage

1. Follow the procedures in
2. Remove the:
a. cover
b. front bezel
Before Working Inside Your Computer .
11