Serial Interfaces - Vertiv Avocent ADX IPUHD 4K IP KVM Device Installer/User Manual

To end a serial session:
Click the user icon in the upper right-hand corner and select Exit Serial Viewer.

2.2.1 Serial Interfaces

Serial Interfaces option allows you to configure the serial communication parameters.
Figure 2.3 Serial Interfaces Overview
To configure Serial Interfaces:
1. From the Configuration screen, select Serial Interfaces.
2. Ensure that the Interface Enabled option is enabled.
NOTE: If the Interface Enabled option is disabled, the serial sessions cannot be launched.
NOTE: If the SSH Enabled option is enabled, you will be connected to the serial port that is configured as per SSH port
through SSH client.
3. Use the drop-down menu to select appropriate values for the below-listed fields:
•
•
•
•
•
4. Enter name in the Display Name field. You can give name of port to which it is connected. For example, to IPSL
RJ45 port 2.
5. Click Apply.
NOTE: To set the default values, use the refresh icon in the upper right corner.
NOTE: Once the Serial Interface is configured, it will be displayed in the Dashboard screen from where you can launch
sessions.
2 Web User Interface (UI)
Bit Rate.
Stop Bits.
Flow Control.
Data Bits.
Parity.
Vertiv™ Avocent® ADX IPUHD 4K IP KVM Device Installer/User Guide
13