Vertiv Avocent ADX IPUHD 4K IP KVM Device Installer/User Manual page 14

Vertiv™ Avocent® ADX IPUHD 4K IP KVM Device Installer/User Guide
Scaling
From the Scaling tab, you can adjust the appearance of the target's screen in the KVM Viewer by using the below options:
1. Enable Maintain Aspect Ratio to maintain the aspect ratio of the Target screen.
2. Select Stretch to Window to fit the Target screen to your display.
3. Select Zoom and use drop-down menu to select the zoom percentage of the display.
Max Resolution
From the Max resolution tab, you can select the maximum target resolution for your KVM session. This setting affects all
sessions and remains until changed again.
NOTE: This setting causes a change of the actual video resolution on your target system's OS.
Macros
The Macros tab provides access to a list of supported operating systems that your target device may use. After you select the
applicable operating system, you can access the list of command strings that are valid for the selected operating system.
NOTE: It is recommended that you use the macros feature to send a command string to a server. Using the macros
feature when sending a command string such as Ctrl-Alt-Delete to a target device will not affect your client server.
Selecting from the available keystrokes saves time and eliminates the risk of errors.
From the Macros section of the status bar, you can send a string of commands with one click to the target computer. The
options in the drop-down list are predetermined based on the macro set you select by accessing the Macros tab. If you are
looking for a command string that does not appear in the list, be sure to verify that you have the correct operating system
selected in the Macro Manage drop-down list.
You can also define macros using the Manage Macros tab.
To send a command to the target computer:
1. Click the Macros drop-down list at the top of the screen and select a command string from the Static Macros list.
2. Click Send.
Tools
From the Tools tab, you can select the keyboard language, capture a screenshot, send an instant message, select the mouse
mode, reset the keyboard, and mouse and enable a virtual keyboard. You can also optimize network bandwidth and choose
when to reduce the update rate.
Virtual Keyboard
When the Virtual keyboard is enabled, the keyboard is displayed on the client's workstation and can be positioned anywhere
inside the window. The up and down directional arrows in the top right corner of the virtual keyboard are used to increase or
decrease the size of the keyboard, respectively.
10
2 Web User Interface (UI)