Page 4
For any usage issues, please feel free to contact us at support@inkbird.com. Wenn Sie eine Bedienungsanleitung in deutscher Sprache benötigen, scannen Sie bitte den QR-Code und besuchen Sie unsere Website, um sie zu erhalten und ein Video über die Verwendung des Produkts zu sehen.
Overview INKBIRD IDT-22-B is a smart Bluetooth 5.3 food thermometer with probe winder and table stand functions and can be used for both barbecue and home cooking. It accurately detects food temperatures, supports setting food temperatures and doneness via a smartphone application, which allows you to remotely monitor food temperature changes, and supports temperature alarms to ensure good cooking results and safety.
Page 6
0~300℃/32~572℉ (short-time measurement) Probe Measurement Range 0~250℃/32~482℉ (continuous monitoring) Probe Cord Length 1.2m/3.9ft Temperature Calibration Range ±7℃(±12℉) Temperature Refresh Time <1s Powered By 500mAh lithium battery Product Size 92*64*23mm Product Weight Device*1(IDT-22-B) Probes*2 Package Contents Probe Clamp*1 Charging Cable*1 User Manual*1...
HD Backlit LCD Screen Display Information Device battery level. Device is charging. Device battery is low, please charge it as soon as possible. Flashing Bluetooth is pairing. Flashing...
Page 10
Bluetooth is connected. Always on Bluetooth is disconnected. Disappear Temperatures are being recorded. Silent mode. Alarm mode. Temperature unit currently displayed. Probe number. The current temperature is detected to reach the preset point, Flashing and a warning is triggered. The current temperature is detected to drop below the preset point, Flashing and a warning is triggered.
Page 11
Battery Details & Precautions Battery Details 1.The INKBIRD IDT-22-B has a built-in 500mAh lithium battery. In the Bluetooth mode, the low-power-consumption battery can last up to 45 hours. 2.If the battery power is insufficient, please charge it with the provided USB charging cable.
Page 12
4.After turning on the device, if no probe is inserted and no button is pressed within 5 minutes, the device will automatically enter sleep mode. 5.If the battery power is too low, the temperature measurement results may be incorrect, the screen backlight and alarm sound may be deactivated, and the device may be disconnected from the smartphone app.
Page 13
2.Prepare a smartphone running iOS12 (or later) or Android 7.1 (or later) to download the INKBIRD app and complete the connection (referring to the section 7 App Installation & Connection). 3.Please successively insert each cleaned probe into the probe ports...
Page 14
4.Open the INKBIRD app and set the parameters for the food that needs to be cooked. 5.Insert the probe into the middle of the meat, avoiding any bones or cartilage. Take care not to tangle the probe cable and ensure that the probe is not exposed to fire.
Page 15
3.APP Location Permission Requirement: We need to obtain your location information to discover and add nearby devices. INKBIRD promises to keep your location information strictly confidential. And your location information will only be used for the location function of the App and will not be collected, used, or disclosed to any third party.
Page 16
7.3 How to Connect Open the INKBIRD app and click “+” on the top right corner to add a device. Then, follow the app instructions to complete the connection. Make sure that the device is placed as close as possible to the smartphone during the connection process.
Page 17
dishwasher, and do not use corrosive detergents. Instead, use running water to wash it and wipe it dry before storing it. Additionally, keep the product away from children to prevent injury due to the sharp probe. 3.If you are not going to use this product for an extended period of time, please charge the battery to approximately 50% of its capacity to prevent the battery from entering a deep discharge state and causing charging failure.
(572°F) or below 0℃ (32°F), not expose it directly to flame or burning wood charcoal, as this may damage the probe and probe cable. 5.During or at the end of cooking, please do not touch the overheated probe or probe cable with bare hands. If necessary, wear heat-insulated gloves to avoid burns.
Page 19
Issue Possible Solutions 5.Make sure that the thermometer is disconnected from any other smartphones and that the Bluetooth function is disabled on those smartphones. 6.Restart the thermometer, open the INKBIRD app, and Why Cannot Connect repeat the connection steps. Bluetooth? 7.Turn off any other Bluetooth devices or disable their...
Page 20
Issue Possible Solutions 4.Check if water seeped into the probe or device. Wipe it dry Why Is The and use a hair dryer to air dry the whole unit, then see if it Probe can read temperature correctly. Reading 5.Do not immerse the probe in water during use or cleaning. Incorrect? If necessary, please purchase a replacement.
Page 21
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 22
for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Warning This device contains licence-exempt transmitter(s)/receiver(s) that ...
Page 23
This item carries a 1-year warranty against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of INKBIRD, be either repaired or replaced without charge. For any problems in use, please feel free to contact us...
Need help?
Do you have a question about the IDT-22-B and is the answer not in the manual?
Questions and answers