Service; Original Ancillaries / Accessories; Attention - Service Lines; Understood Everything - Parkside KH 3162 PNEUMATIC HAMMER DRILL Operation And Safety Notes

General Safety Notices
you carry the appliance with your finger on the
ON / OFF switch or connect the appliance to the
mains supply whilst it is switched on, this can
lead to serious accidents.
J
Remove all adjustment tools or screwdrivers before
switching the appliance on.
A tool or key in a spinning appliance component
can cause serious injuries.
J
Do not overrate yourself. Ensure you have a secure
positioning and are in balance at all times. You
can thus control the appliance so much better,
especially in unexpected situations.
J
Wear suitable clothing. Do not wear loose clothing
or jewelery. Keep your hair, clothing and gloves
away from moving components. Wear a hair net
if you have long hair. Loose and hanging clothing,
jewellery and hair can become caught up in fast
rotating appliance components.
J
Use dust collecting equipments if these can be
assembled onto the appliance. Take note thereby
that the dust collecting equipment must be suit-
able for this particular operation. The correct
application of these equipments reduces the
dangers originating from dust.
When working with electrical appliances that
have a dustsack, or can be connected with such
a facility by means of a dust suction an-cillary,
there is a danger of fire! Under unfavourable
conditions, such as for example flying sparks,
grinding of metal or metal remnants in wood,
the wood dust in the dust sack (or in the filter
sack of a vacuum suction device) can ignite itself.
This can happen especially if the wood dust has
paint particles on it or is mixed with other
chemical substances and the grinded material
is hot after extensive working. You should there-
fore avoid an overheating of grinding products
and of the appliance, and always empty the dust
sack or the filter sack of the vacuum suction
device before work pauses.
J
Secure the workpiece firmly. Use clamps or a
vice to firmly hold the workpiece. Thus it is held
safer than with your hand.
8 GB/IE

Service

L
J
Arrange for your appliance to be repaired only
by qualified specialists and only with original
spare parts. It can thus be ensured that the
safety of the appliance is assured.
J
Always arrange for the exchange of the plug or
the power cable to be carried out by the manu-
facturer of the appliance or by his approved cus-
tomer services. It can thus be ensured that the
safety of the appliance is assured.

Original ancillaries / accessories

L
J
Use only the ancillaries and accessories that
are detailed in the operating instructions.
The use of ancillaries and accessories other
than those recommended in the operating
instructions could lead to an increased risk of
personal injury for you.

Attention - Service lines!

L
J
Warning!
Take steps to ensure that you do not hit upon
any service lines (electricity, gas, water) when
working with electrical appliances. Check, if
need be with a service line detector, before you
start to cut or bore into a surface.

Understood everything?

L
J
When you have become familiar with these gen-
eral safety instruction for electrical appliances,
and, with the help of the appropriate operating
instructions, know all about the functions and
handling of your electrical appliance, then you
can start working with it.
You will work at your safest only with careful at-
tention to all of the declarations and instructions
of the manufacturer.