Table of Contents
Advertisement
Using the components
-36.
dB
38
shows full deflection during the loudest passages,
but the yellow LED
Press the
SET
button
setting.
"STORED" briefly appears on the display. The
sensitivity of the microphone input is now stored.
Adjusting the input sensitivity on the wireless
microphone
The input sensitivity is set too high if overmodulation
occurs when speaking loudly or close to the
microphone. The audio level display (AF)
deflection in the event of overmodulation.
On the other hand, if the input sensitivity is set
low, the modulation will be too weak. This will cause a
noisy signal.
The input sensitivity is set
level display (AF) only shows full deflection during the
loudest passages.
To set the wireless microphone modulation:
Press the
SET
button
The operating menu appears. The first menu item
"CHAN" flashes.
Repeatedly press the
"SENSIT" flashes on the display and the audio
level
appears.
Press the
SET
button
The current input sensitivity and the audio level
appear on the display.
Press the / buttons
so that the audio level
during the loudest passages.
Press the
SET
button
setting.
"STORED" briefly appears on the display. The
wireless microphone modulation is stored.
As a rough preset, set the wireless microphone to:
Presenting: –24 to –12 dB
Interview:
–12 to 0 dB
PEAK
never lights up.
to permanently store the
correctly
when the audio
.
/
buttons
.
/
to change the setting
shows full deflection
to permanently store the
shows full
too
/
until
Advertisement
Table of Contents
