Table of Contents
Advertisement
Putting the components into operation
24
Inserting/Changing batteries or accupack in the
bodypack transmitter
For powering the transmitter, use either the
rechargeable BA 2015 accupack
size batteries. Do not use any other rechargeable
batteries!
Open the battery compartment by pressing the two
release buttons
Insert the batteries or the BA 2015 accupack
shown in the diagram on the left. Please observe
correct polarity when inserting the batteries/
accupack.
Close the battery compartment cover
Connecting the microphone to the bodypack
transmitter
Note:
Suitable Sennheiser microphones are listed on
page 7.
Connect
the
transmitter's microphone input
Lock the plug by screwing down the coupling ring.
Adjust the sensitivity of the microphone input, as
described on page 37.
Connecting external audio source to the bodypack
transmitter
You can connect an external audio source, such as a CD
player, MP3 player, tape player, etc. to the bodypack
transmitter. (Please note that you cannot connect a
second microphone.) Both signals – the microphone
or two 1.5 V AA
and open the cover
microphone
to
.
.
as
.
the
bodypack
Advertisement
Table of Contents
