Table of Contents
Advertisement
CH 03
LINE
MIC
CH 03
LINE
MIC
Connect the external audio source, switch it on and
start playback.
Press the
SET
button
The operating menu appears. The first menu item
"CHAN" flashes.
Repeatedly press the
"SENSIT" flashes on the display and the LINE level
display
appears.
Press the
SET
button
The current input sensitivity and the LINE level
display
appear on the display.
Press the
/
input sensitivity so that the LINE level display
shows full deflection during the loudest passages,
but the yellow LED
Press the
SET
button
setting.
"STORED" briefly appears on the display. The
sensitivity of the line input is now stored.
Changing the sensitivity of the microphone input on
the bodypack transmitter
To adjust the sensitivity of the microphone input to
match the connected microphone:
Connect the microphone, position it correctly (refer
to the microphone's operating manual) and speak
into the microphone as usual.
Press the
SET
button
The operating menu appears. The first menu item
"CHAN" flashes.
Repeatedly press the
"SENSIT" flashes on the display and the MIC level
display
appears.
Press the
SET
button
The current input sensitivity and the
display
appear on the display.
Press the
/
input sensitivity so that the
Using the components
.
/
rocker button
.
rocker button
PEAK
never lights up.
to permanently store the
.
/
rocker button
.
rocker button
MIC
level display
until
to change the
until
MIC
level
to change the
37
Advertisement
Table of Contents
