Table of Contents
Advertisement
To exit the operating menu:
Or:
Setting the receiver channel
In order for the receiver to receive the signal from the
bodypack transmitter or the wireless microphone, it
has to be set to the
To manually set the receiver channel:
6
Press
/
to change the channel.
If you press
, the display jumps to the next
channel; if you press
previous channel.
By pressing and holding the
display cycles continuously (repeat function).
Press the
SET
button to permanently store the
selected channel.
"STORED" appears briefly in the display. The
bodypack transmitter or the wireless microphone is
now transmitting on the selected channel. The last
menu selected is shown.
Use
/
to select the menu item "EXIT" and press
the
SET
button.
The standard display is shown.
Press and hold the
standard display is shown.
same
Press the
/
selection.
The channel changes. The selected channel is
shown on the channel display
If the bodypack transmitter is transmitting on this
channel, the RF signal indication
field strength of the received RF signal.
Notes:
By pressing and holding the
for channel selection
continuously (repeat function).
After channel 6, the display will return to
channel 1.
Using the components
, the display jumps to the
/
ON/OFF
button until the
channel.
rocker button
.
indicates the
/
rocker button
, the display cycles
buttons, the
for channel
33
Advertisement
Table of Contents
