Using the transmitter
14
Press the jog dial.
The transmission icon
To switch the transmitter to
If necessary, deactivate the lock mode (see page 14)
Keep the
STANDBY
The transmitter switches to standby mode.
When in the operating menu, pressing the
(ESC function) and return you to the standard display.
The
STANDBY
button
To completely switch the transmitter off:
Disconnect the transmitter from the mains by unplugging the mains plug from the wall
socket.
The backlighting of the
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the
page 25). If the lock mode is activated, you have to temporarily deactivate it In order to be
able to operate the transmitter:
Press the jog dial.
"Locked" appears on the display panel.
Turn the jog dial.
"Unlock?" appears on the display panel.
Press the jog dial.
The lock mode is temporarily deactivated.
– When you are in the operating menu, the lock mode remains deactivated until
you exit the operating menu.
– When the standard display is shown, the lock mode is automatically activated
after 10 seconds.
The lock mode icon
flashes prior to the lock mode being activated again.
**2000**
B.Ch:
5.14
552.300
MHz
EQ
Standard -18dB
Activating/deactivating the RF signal
To
deactivate
the RF signal:
When the standard display is shown on the display panel, press the
button.
"RF Mute
On?" appears on the display panel.
is displayed again.
standby
mode:
button
pressed until "OFF" appears on the display panel.
STANDBY
is backlit in red both during operation and in standby mode.
STANDBY
button
goes off.
button
will cancel your entry
"Auto
Lock" menu item (see
STANDBY