Entering A Name - Name; Adjusting The Microphone Sensitivity - Atten - Sennheiser SKM 5200 Instructions For Use Manual

Entering a name –
Via the "NAME" menu, you can enter a freely selectable name for
the radio microphone. This name can be displayed on the standard
display and can consist of up to six characters such as:
letters (without pronounciation marks),
numbers from 0 to 9,
special characters and spaces.
After you have changed to the setting mode of the "NAME" menu,
the first segment starts flashing on the display.
UP
SET
DOWN
Adjusting the microphone sensitivity –
Via the "ATTEN" menu, you can adjust the radio microphone's
sensitivity by changing its input attenuation.
dB
NAME
Slide the multi-function switch
to the position
to select a character.
(By sliding the switch only once, the
display jumps either forwards or
backwards to the next character. If
you keep the switch slid, the display
starts cycling continuously.)
Press the multi-function switch
(switch position
the next segment.
Have
completely?
function switch
SET
) to store your setting.
"STORED" appears on the display
panel.
The input
adjusted when the level display for audio
RF
signal "AF"
AF
during the loudest passages. The input
attenuation can be adjusted in 1-dB steps
from –40 dB to 0 dB.
(UP) or
SET
) to change to
you entered
Press
(switch position
attenuation
shows full deflection only
(DOWN)
the name
the multi-
ATTEN
is correctly
25