Accessories/Replacement Parts; Service, Calibration And Control Of Function; Troubleshooting - FSA POWERBOX K-FORCE TEAM EDITION User Manual And Instructions

Do not clean your power meter with a high-pressure power hose.
8. Disposal
The symbol of the crossed-out garbage pail on wheels, which can be found on the product, the
documentation and the packaging, means that electrical and electronic products, batteries and accumulators
need to be discarded separately in the European Union. Do not dispose of these products in general
household garbage. Separate these products from other garbage in order not to damage people's health or
the environment due to uncontrolled garbage disposal and in order to promote sustainable recycling of
material resources.
9. Accessories, Replacement Parts
If needed, you can order accessories or replacement parts for your PowerBox cranksets at
www.fullspeedahead.com.
10. Repair
To a certain degree, repairing a PowerBox power meter is possible. If repairs are needed, please contact FSA.

11. Service, Calibration and Control of Function

The PowerBox power meter is calibrated at the factory and doesn't have to be newly calibrated within the
warranty period. Regardless of this fact, you still have the option of ordering a calibration and function control
by contacting FSA. In this case, we will examine your PowerBox power meter on the outside, perform a new
factory calibration and control of function. In addition to your PowerBox power meter, you also receive a new
test and approval certificate.
Ordering a calibration and function control can be advisable after a crash, among other things. However, it
does not extend warranty coverage and only excludes a possible liability resulting from mechanical damage
that has not been identified.

12. Troubleshooting

1. Green LED indicator light doesn't blink after activation
Battery is low - change battery
2. Red LED indicator light blinks after activation
Power meter error - turn off and then on. If this is unsuccessful, contact an FSA Service center.
3. Power meter does not pair with a head unit
Battery is low - change battery
Computer unit is not in pairing mode - place computer unit in pairing mode
Power meter is in standby - activate power meter by rotating the crank.
Transmission is flawed - avoid sources of disturbance such as Wi-Fi networks, microwaves, mobile phones
and other active power meters.