Summary of Contents for FSA POWERBOX K-FORCE TEAM EDITION
Page 2
FSA PowerBox by power2max 1. Quick Start Guide 2. PowerBox Crankset Installation 3. Declaration of Conformity 4. Warranty 5. PowerBox Power Meter Operation 6. Using Your Power Meter 7. Maintenance and Care 8. Disposal 9. Accessories and Replacement Parts 10. Repair 11.
Page 3
Since specific tools and experience are necessary for proper installation, FSA recommends that the product be installed bya qualified bicycle technician. FSA & Vision assume no responsibility for damages or injury related to improperly installed components...
Page 4
2. PowerBox Crankset Installation 2.1 Road PowerBox Crankset Installation Instructions Specification Item Number / Model Name K-Force Team Edition PowerBox Direct Mount 2X BB386EVO Components Follow the assembly order in the illustration: ① Bottom Bracket Shell x1 ⑥ Left Crank Arm x1 ②...
Page 5
Left Arm Removal in case of need to change spindle 1. Use a 8mm hex wrench to remove drive arm ③ with the self extracting bolt ⑨. 2. Remove drive side (right) crank arm ③ self extracting collar ⑨ using a 10mm Hex. 3.
4.1 Scope of Warranty Full Speed Ahead (FSA) warrants all FSA, Vision, Metropolis and RPM products to be free from defects in materials or workmanship for a period of two years after original purchase unless otherwise stated in the full warranty policy.
Damages resulting from the use of parts that are not compatible or appropriate or are not authorized for use for FSA PowerBox crankset are excluded from this warranty. The warranty shall not cover any damages that are caused by commercial use (rentals).
automatically determined by your PowerBox power meter. The zero-point adjustment compensates for influences caused by temperature variations and mechanical zero-point shifts. It is possible to repeatedly set the zero point at the head unit, but it isn’t necessary! This is performed by the system automatically when it is not under power.
Regardless of this fact, you still have the option of ordering a calibration and function control by contacting FSA. In this case, we will examine your PowerBox power meter on the outside, perform a new factory calibration and control of function. In addition to your PowerBox power meter, you also receive a new test and approval certificate.
Battery is low - change battery Operating software is in an undefined state (the power meter has “crashed”) - Turn off and then on by removing and inserting the battery. If this is unsuccessful, contact an FSA Service center. 5. Power measurements are not plausible The zero point has changed uncontrollably - during a ride: do a zero point adjustment by depowering.
Need help?
Do you have a question about the POWERBOX K-FORCE TEAM EDITION and is the answer not in the manual?
Questions and answers