FSA POWERBOX K-FORCE TEAM EDITION User Manual And Instructions page 3

1. Quick Start Guide
Please read the user's manual carefully before installation and use. Improper installation can cause accidents In
case of doubt, consult a professional bicycle mechanic. Observe the indicated torque values when installing
screws and bolts
Before going on a ride, get to know the functions and operation of your power meter. Get a checkup from a sports
physician before starting your training program. Pay attention to traffic and road conditions before checking any
data
Introduction
Introduction
Congratulations! Your PowerBox power meter is an excellent choice for accurate power training. Please read
these instructions and follow them for correct use. Failure to follow the warnings and instructions could result in
damage to product not covered under warranty, damage to bicycle; or cause an accident resulting in injury or
death. Since specific tools and experience are necessary for proper installation, FSA recommends that the product
be installed bya qualified bicycle technician. FSA & Vision assume no responsibility for damages or injury related
to improperly installed components
Specification
These instructions are for the installation of the following FSA components only
K-Force Team Edition PowerBox Direct Mount 2X BB386EVO
CKM-OS8505CC/86/PBox
Installation and operation:
1. Remove the battery isolation strip by pulling it out of the battery compartment
(You do not need to open the battery compartment.)
2. The LED indicator is now flashing green. Please pair the power meter to your cycling computer (observe
computer manufacturer's instructions).
3. Install the crankset to the bicycle (observe manufacturer's instructions and torque values!)
After installing, check the function of the front derailleur and adjust as necessary Finished!
Now, go ride and have fun with your FSA PowerBox!