Subscribe to Our Youtube Channel
Related Manuals for infobit iTrans UC-Hub21
Summary of Contents for infobit iTrans UC-Hub21
- Page 1 UC-Hub21 4K60 18Gbps HDMI/USB-C 2x1 UC/KVM Hub User Manual V2.0 INFOBIT AV www.infobitav.com info@infobitav.com...
-
Page 2: Table Of Contents
5.2 Rear Panel ..........................6 5.3 IR Pin definition ........................7 6. IR Remote ........................7 7. Hotkey Swtich ........................ 7 8. Keyboard/ Mouse Hotkey ....................8 9. ASCII Control ........................8 10. Diagram ........................11 INFOBIT AV www.infobitav.com info@infobitav.com... -
Page 3: Overview
5Gbp/s • Compact design for easy and flexible installation 3. Package list • 1 x 4K60 2x1 HDMI/USB-C KVM Switcher • 1 x IR Remote INFOBIT AV www.infobitav.com info@infobitav.com... -
Page 4: Specification
• 2 x Mounting Ears • 4 x Machine Screws (KM3*4) • 1 x 12V/1A Multinational Locking Power Supply • 1 x User Manual 4. Specification Model iTrans UC-Hub21 Name 4K60 18Gbps HDMI/USB-C 2x1 UC/KVM Hub HDMI Compliance HDMI 2.0 HDCP Compliance HDCP 2.3... -
Page 5: Operation
The Power LED will light in green when the product is working, and red when the product is on standby. Input channel LED When the HDMI input port 1/2 is selected as the signal input channel, the corresponding LED 1/2 will light in green. INFOBIT AV www.infobitav.com info@infobitav.com... -
Page 6: Rear Panel
IR receiver cable can be inserted to the “IR EXT” port to receive the IR remote signal. DC 12V DC 12V/1A power input port. INFOBIT AV www.infobitav.com info@infobitav.com... -
Page 7: Ir Pin Definition
The Hotkey switch on the front panel allows you to enable/disable the hotkey switch function. (1) When Hotkey switch to OFF mode, the hotkey switch function is disabled, and two USB 3.0 ports (with hotkey mode) support USB 3.2 Gen 1 device. INFOBIT AV www.infobitav.com info@infobitav.com... -
Page 8: Keyboard/ Mouse Hotkey
9. ASCII Control The product also supports ASCII commands control. Connect the RS-232 port of the product to a PC with a 3-pin phoenix connector cable and an RS-232 to USB cable. The connection method is as follows. INFOBIT AV www.infobitav.com info@infobitav.com... - Page 9 (z=0~1) 0. power off 1. power on r power! Get current power r power! power on state reboot! Reboot the device reboot! reboot… reset! Reset to factory reset! reset to factory defaults defaults INFOBIT AV www.infobitav.com info@infobitav.com...
- Page 10 1 in output1->input1 source! selected input source! source s beep z! Enable/disable s beep 1! beep on beep off buzzer function (z=0~1) 0. beep off 1. beep on r beep! Get buzzer state r beep! beep on INFOBIT AV www.infobitav.com info@infobitav.com...
-
Page 11: Diagram
10. Diagram INFOBIT AV www.infobitav.com info@infobitav.com...
Need help?
Do you have a question about the iTrans UC-Hub21 and is the answer not in the manual?
Questions and answers