Related Manuals for infobit iTrans USB32-S
Summary of Contents for infobit iTrans USB32-S
- Page 1 USB32-S USB 10G Switcher 2x1 with Auto Switching All Rights Reserved Version: V1.0 INFOBIT www.infobitav.com info@infobitav.com...
- Page 2 Preface Read this user manual carefully before using the product. Pictures shown in this manual are for reference only. Different models and specifications are subject to real product. This manual is only for operation instruction, please contact the local distributor for maintenance assistance.
- Page 3 SAFETY PRECAUTIONS To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. Unpack the equipment carefully and save the original box and packing material for ⚫ possible future shipment Follow basic safety precautions to reduce the risk of fire, electrical shock and injury ⚫...
-
Page 4: Table Of Contents
Table of Content 1. Product Introduction ....................1 1.1 Feature ....................... 1 1.2 Package List ....................... 1 2. Specification ........................ 2 3. Panel Description ......................3 3.1 Front Panel ......................3 3.2 Rear Panel ......................4 4. System Connection ..................... 5 5. -
Page 5: Product Introduction
1. Product Introduction Thanks for choosing the iTrans USB32-S 10G hub, which is designed to switch the host and connect KVM devices to control the host. The hub can be controlled by button in front panel, RS232 and GPIO. 1.1 Feature 2x1 USB 3.2 switcher, 10G. -
Page 6: Specification
2. Specification HOST Host (2) USB-B Host Connector (2) USB-B Bandwidth Up to 10Gbps DEVICES Devices (3) USB-A (1) USB-C Device Connector (3) USB-A (1) USB-C Three USB-A and one USB-C share 2A total Current current Control Control Ports (1) Button, (1) RS232, (1) GPIO (1) White non-luminous button, Control Connector (1) 3-pin terminal block,... -
Page 7: Panel Description
3. Panel Description 3.1 Front Panel ① LED light: ⚫ Power LED: The indicator illuminates green when powering on and flashes when the devices current is overloaded. ⚫ HOST LED: When switching to the current host, the indicator illuminates blue, otherwise it turns off. -
Page 8: Rear Panel
3.2 Rear Panel ① DEVICES: 3x USB-A 3.2 gen2 for connecting KVM devices. 1x USB-C 3.2 gen2 for connecting camera device. Four USB devices port share 2A total current. ② RS232 and GPIO: 4-pin terminal block to connect central control device. ③... -
Page 9: System Connection
4. System Connection Usage Precautions Make sure all components and accessories included before installation. ⚫ System should be installed in a clean environment with proper temperature and ⚫ humidity. All the power switches, plugs, sockets, and power cords should be insulated and ⚫... - Page 10 For Medium-to-large Meeting Room...
-
Page 11: Panel Drawing
5. Panel Drawing 6. RS232 Control Connect the RS232 ports of iTrans USB32-S, the hub can be control by the PC. Baud Rate: 9600(default), 19200, 38400, 57600, 115200 6.1 Installation/uninstallation of RS232 Control Software ⚫ Installation Copy the control software file to the computer ⚫... -
Page 12: Rs232 Communication Commands
Command Sending Area. Note: To control iTrans USB32-S via RS232 port, the communication protocol parameters should be configured in the right manner: Baud rate: 9600; Data bit: 8; Stop bit: 1;... - Page 13 To Host [param1] param1 = 01~02: USB Host 1~2 >SetDevicePower [param1] [param2] Set Device [param1] Power On Or Off param1 = 00~04 00: All Device 01~04: Device 1~4 param2 = On, Off >GetStatus >GetStatus <iTrans USB32-S <FW Version: 1.0.0 <USB Device All...
- Page 14 Host <HostLink Host Link <DevicePower Device 1 2 3 4 Power 0 0 0 0 <RS232Baud: 9600 <AutoSwitch On <IOMode 0 >Reboot >Reboot <Reboot >SetUSB >SetUSB <USB Device All Host >FactoryR >FactoryR <FactoryReset eset eset >SetAutoS >SetAutoS <SetAutoSwitch On witch witch <SetAutoSwitch Off On/Off...
-
Page 15: Gpio Mode
7. GPIO Mode The GPIO of iTrans USB32-S have two modes: PULSE mode(default) and LEVEL mode. The GPIN pulse mode is the factory default. Each transition from HIGH to LOW on ⚫ GPIN pin will force a PC change. See the following picture for the explanation of the mode. -
Page 16: Troubleshooting & Maintenance
8. Troubleshooting & Maintenance Problems Potential Causes Solutions Color losing or no video signal output in HDMI display. The connecting cables No HDMI signal output in Check whether the cables may not be connected the device while local are connected correctly correctly or it may be HDMI input is in normal and in working condition. -
Page 17: Customer Service
9. Customer Service The return of a product to our Customer Service implies the full agreement of the terms and conditions hereinafter. There terms and conditions may be changed without prior notice. 1) Warranty The limited warranty period of the product is fixed three years. 2) Scope These terms and conditions of Customer Service apply to the customer service provided for the products or any other items sold by authorized distributor only.