Knob X Knob - Assa Abloy Corbin Russwin ML2000 Series Installation Instructions Manual

Anti-Harm Knob Trim (HSS)
ML2000 Series Mortise Lock
Installation Instructions
3 HSS Trim Installation
1

Knob x Knob

1. Insert outside knob assembly through door and
lockbody. (Figure 18)
NOTE:
ALIGN SPINDLE WITH SQUARE HOLE IN
LOCKBODY AS SHOWN IN (FIGURE 19)
2. Install inside knob assembly by threading
mounting screws into lugs from outside knob
assembly with supplied Allen wrench.
(Figure 20)
NOTE:
MAKE SURE HOLES IN KNOB ARE ALIGNED
WITH SCREWS IN ADAPTER PLATE . ALIGN
SPINDLE WITH SQUARE HOLE IN LOCKBODY
AS SHOWN (FIGURE 19)
3. Install lock front using two front screws.
(Figure 21)
For installation assistance contact Corbin Russwin
1-888-607-5703 • support@corbinrusswin.com
Copyright © 2017 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
Figure 18
6
Figure 19
Figure 20
Figure 21
FM311 11/17