Assa Abloy ML22HPH Instructions

CHANGING THE MASTER-CODE

1. Press for 4 seconds (green LED starts to blink)
2. Enter Master-code (factory setting 1111) and press
3. Enter new Master-code (4 - 12 numbers) and press
4. Enter new Master-code again and press
Short melody and LED blinks several times when changed successfully.
Note. Master-code must be changed before adding User-code.

ADDING USER-CODE

Enter User-code (4 numbers)
or
Press and enter User-code (5 - 12 numbers) and press
Short melody and LED blinks several times when changed successfully.
Note. Opening with the Master-code will delete the User-code.

CHANGING THE USER-CODE

1. Enter User-code and press
2. Enter new User-code (4 numbers)
or
2. Press and enter User-code (5 - 12 numbers) and press
Short melody and LED blinks several times when changed successfully.

OPENING WITH THE MASTER-CODE

+ Master-code +

MELODY OFF

and pressed
simultaneously for 2 seconds
RESET (if there is unknown problem and lock does not work. Does not delete codes)
Press and

CARE INSTRUCTIONS

Use a damp, soft cloth for removing stains and fingerprints from the lock. For grease and other accumulated dirt
use cloth with mild cleaning agent. The lock does not need to be greased.
Copyright® Abloy Oy Joensuu Factory
ML22HPH, ML32HPH, ML22HPV, ML32HPV
INSTRUCTIONS
simultaneously (Short melody and green and red LED blinks)

OPENING WITH THE USER-CODE

User-code

MELODY ON

and pressed
simultaneously for 2 seconds
An ASSA ABLOY Group brand