Sennheiser HDE 2020-D Instruction Manual page 46

Loading the factory-preset default settings
To load the factory-preset default settings of the
bodypack transmitter/radio microphone:
ON/OFF ON/OFF
Bodypack transmitter
Press the SET button.
The operating menu appears and the first menu
item "CHAN" flashes on the display.
Repeatedly press
display.
Press the SET button.
"RST.OK" flashes on the display.
Press the SET button to load the factory-preset
default settings.
"DONE" briefly appears on the display. The body-
pack transmitter/radio microphone is reset to the
following factory-preset default settings:
• Channel: 1
• Line input: switched off
(bodypack transmitter only)
• Input sensitivity:
Line input:
– –
(bodypack transmitter only)
Microphone input: –12 dB
–
• Lock mode: deactivated
• Infra-red service interface: deactivated
Activating/deactivating the lock mode
The lock mode prevents the bodypack transmitter/
radio microphone from being accidentally pro-
grammed or switched off during operation.
Using the components
LOW BATT
MUTE
PEAK
SET SET
Radio microphone
/ until "RESET" flashes on the
24 dB
45