Sennheiser HDE 2020-D Instruction Manual page 42

CH 03
LINE
MIC
Changing the sensitivity of the bodypack
transmitter's line input
To adjust the sensitivity of the line input to match the
connected audio source:
Make sure that the line input is switched on (see
previous section).
Connect the external audio source, switch it on and
start playback.
Press the SET button
The operating menu appears and the first menu
item "CHAN" flashes on the display.
Repeatedly press the
"SENSIT" flashes on the display and the
display appears.
Press the SET button
The current input sensitivity and the
display appear on the display.
Press the /
input sensitivity so that the LINE level display
shows full deflection during the loudest passages,
but the yellow LED
manently.
Press the SET button
setting.
"STORED" briefly appears on the display, indicating
that the sensitivity of the line input has been
stored.
Using the components
.
/ rocker button
.
rocker button to change the
PEAK does not light up per-
to permanently store the
until
LINE level
LINE level
41