Putting The Components Into Operation - Sennheiser HDE 2020-D Instruction Manual

Putting the components into operation

Putting the components into
operation
Setting up the charging case
Note:
The charging case as well as the accupacks and the
receivers' built-in rechargeable batteries will get
hot during charging. Please ensure the following so
that the generated heat can dissipate:
• The air vents
covered or blocked.
• The charging case must be kept away from heat
sources and must never be exposed to direct
sunlight.
• During charging, do not put the case cover on the
charging case.
The charging case has four plastic feet to ensure that
it cannot slip on the surface on which it is placed.
Some furniture surfaces have been
CAUTION!
treated with varnish, polish or synthetics
which might cause stains when they
come into contact with other synthetics.
Despite a thorough testing of the syn-
thetics used by us, we cannot rule out the
possibility of staining.
Place the charging case on a flat, even surface.
Connect the supplied mains cable to the IEC mains
socket on the charging case.
Connect the mains cable to a wall socket.
Note:
The case cover can be used as a stand for the
charging case (see diagram on the left).
of the charging case must not be
25