Sennheiser HDE 2020-D Instruction Manual page 43

Using the components
CH 03
LINE
MIC
42
Changing the sensitivity of the bodypack
transmitter's microphone input
To adjust the sensitivity of the microphone input to
match the connected microphone:
Connect the microphone, position it correctly (refer
to the microphone's instruction manual) and speak
into the microphone as usual.
Press the SET button
The operating menu appears and the first menu
item "CHAN" flashes on the display.
Repeatedly press the
"SENSIT" flashes on the display and the
display appears.
Press the SET button
The current input sensitivity and the
display appear on the display.
Press the /
input sensitivity so that the
shows full deflection during the loudest passages,
but the yellow LED
permanently.
Press the SET button
setting.
"STORED" briefly appears on the display, indicating
that the sensitivity of the microphone input has
been stored.
.
/ rocker button
.
rocker button
MIC level display
PEAK does not light up
to permanently store the
until
MIC level
MIC level
to change the