Rockwell Automation Allen-Bradley MicroLogix 1100 User Manual
  1. Manuals
  2. Brands
  3. Rockwell Automation Manuals
  4. Controller
  5. Allen-Bradley MicroLogix 1100
  6. User manual

Rockwell Automation Allen-Bradley MicroLogix 1100 User Manual

Hide thumbs Also See for Allen-Bradley MicroLogix 1100:
Table of Contents

Advertisement

Quick Links

Download this manual
MicroLogix 1100
Programmable Controllers
Bulletin 1763 Controllers and 1762 Expansion I/O
User Manual
Original Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Allen-Bradley MicroLogix 1100 and is the answer not in the manual?

Questions and answers

Related Manuals for Rockwell Automation Allen-Bradley MicroLogix 1100

Summary of Contents for Rockwell Automation Allen-Bradley MicroLogix 1100

  • Page 1 MicroLogix 1100 Programmable Controllers Bulletin 1763 Controllers and 1762 Expansion I/O User Manual Original Instructions...
  • Page 2 If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.

  • Page 3: Table Of Contents

    Panel Mounting ............27 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 4 Ethernet Connections..........68 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 5 Program/Data Upload..........103 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 6 Calling Rockwell Automation for Assistance ........139...
  • Page 7 Configure Using BOOTP ........... 160 Using the Rockwell Automation BOOTP/DHCP Utility ..... . . 161 Use a DHCP Server To Configure Your Processor .
  • Page 8 ..............173 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 9: Preface

    Rockwell Automation recognizes that some of the terms that are currently used in our industry and in this publication are not in alignment with the movement toward inclusive language in technology.
  • Page 10 Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system. Product Certifications website, rok.auto/certifications Provides declarations of conformity, certificates, and other certification details.

  • Page 11: Hardware Overview

    (1) The four high-speed inputs (inputs 0…3) can be used individually for pulse catch/latching inputs or combined as a high-speed counter. See Digital Input Specifications on page 112 and the MicroLogix 1100 Programmable Controllers Instruction Set Reference Manual, publication 1763-RM001, for more information. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 12: Component Descriptions

    System Loading and Heat Dissipation on page 165 to determine how much heat a certain combination generates. Figure 3 - 1762 Expansion I/O Modules 1762 expansion I/O module 1762 expansion I/O modules connected to a MicroLogix 1100 controller Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 13: Communication Cables

    Program the MicroLogix 1100 controller using RSLogix 500 software, version 7.00.00 or later. To use the latest features, you must use RSLogix 500 software, version 7.20.00 or later. Communication cables for programming are available separately from the controller and software. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 14: Communication Options

    Communication Connections on page 51 for more information on connecting to the available communication options. (a) OS series B FRN 4 or later. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 15: Install Your Controller

    (b) Overvoltage Category II is the load-level section of the electrical distribution system. At this level, transient voltages are controlled and do not exceed the impulse voltage capability of the product’s insulation. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 16: Disconnecting Main Power

    These devices must be wired in series so that when any one device opens, the master control relay is de-energized, which removes power to the machine. Never alter these circuits to defeat their function. Serious injury or machine damage could result. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 17: Power Distribution

    DC power to the system. This is referred to as a power supply shutdown. The processor then performs an orderly shutdown of the controller. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 18: Input States On Power Down

    When you use the master control relay to remove power from the external I/O circuits, power continues to be provided to the controller’s power supply so that diagnostic indicators on the processor can still be observed. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 19: Emergency Stop Switches

    5, show the master control relay that is wired in a grounded system. In most applications, input circuits do not require MCR protection; however, if you must remove power from all field devices, you must include MCR contacts in series with input power wiring. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 20 DC power supply Use IEC 950/EN 60950. (Hi) (Lo) 24V DC I/O circuits Line terminals: Connect to terminals of power supply (1763-L16AWA, 1763-L16BWA) Line terminals: Connect to 24V DC terminals of power supply (1763-L16BBB, 1763-L16DWD) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 21 Class 2 for UL Listing. (Lo) (Hi) 24V DC I/O circuits Line terminals: Connect to terminals of power supply (1763-L16AWA, 1763-L16BWA) Line terminals: Connect to 24V DC terminals of power supply (1763-L16BBB, 1763-L16DWD) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 22: Install A Memory Module

    1747-IN515, for more information on installation, handling, usage, storage, and disposal of the battery. RTC Battery Operation on page 101, for more information on the use of the battery in relation with RTC. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 23: Connecting The Battery Wire Connector

    Battery wire connector Battery connector Controller Mounting Figure 6 - Controller Dimensions Dimensions 1763-L16AWA, 1763-L16BWA, 1763-L16BBB, 1763-L16DWD Dimension 1763-L16AWA 1763-L16BWA 1763-L16BBB 1763-L16DWD 90 mm (3.5 in.) 110 mm (4.33 in.) 87 mm (3.43 in.) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 24: Controller And Expansion I/O Spacing

    (b) Over Voltage Category II is the load-level section of the electrical distribution system. At this level transient voltages are controlled and do not exceed the impulse voltage capability of the product’s insulation. (c) Pollution Degree 2 and Over Voltage Category II are International Electrotechnical Commission (IEC) designations. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 25: Din Rail Mounting

    2. Holding the controller, pry downward on the latch until the latch locks in the open position. 3. Repeat steps 1 and 2 for the second DIN rail latch. 4. Unhook the top of the DIN rail slot from the rail. Closed Open Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 26: Panel Mounting

    Debris shield Mounting template 1762 Expansion I/O Module Figure 9 - 1762 Expansion I/O Module Dimensions Dimensions Dimension Expansion I/O Module 90 mm (3.5 in.) 40 mm (1.57 in.) 87 mm (3.43 in.) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 27: Mount 1762 Expansion I/O

    40.4 14.5 (1.59) (0.57) MicroLogix (3.94) (3.54) 1100 A = 95 mm (3.74 in.) 1763-L16AWA, 1763-L16BWA, 1763-L16BBB, 1763-L16DWD All dimensions are in mm (inches). 40.4 Hole spacing tolerance: ±0.4 mm (0.016 in.) (1.59) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 28: Connect Expansion I/O Modules

    Connect Expansion I/O Modules on page 28. If DIN rail mounting is used, an end emergency stop must be installed ahead of the controller and after the last 1762 I/O module. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 29: Wire Your Controller

    To wire the terminal block: 1. Strip the end of the wire. The recommended length for the stripped end of the wire is 11.0 mm (0.44 in.). 2. Insert it into an open clamp. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 30: Use Surge Suppressors

    14. For inductive DC load devices, a diode is suitable. A 1N4004 diode is acceptable for most applications. A surge suppressor can also be used. See Table 4 recommended suppressors. As shown in Figure 14, these surge suppression circuits connect directly across the load device. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 31 See the table on 32 for recommended suppressors. Figure 15 - Surge Suppression for Inductive AC Load Devices Output device Output device Output device Surge suppressor RC network Varistor Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 32: Recommended Surge Suppressors

    Additional grounding connections from the mounting tab or DIN rail, if used, are not required unless the mounting surface cannot be grounded. Use all four mounting positions for panel mounting installation. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 33: Wiring Diagrams

    Terminal Block Layouts Figure 16 - 1763-L16AWA Group 0 Group 1 Group 2 USED USED IV1(+) IV2(+) Input Terminal Block Output Terminal Block L2/N 100-240 VAC USED USED Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 34: Terminal Groupings

    I/4 through I/9 Group 2 IA COM IV1(+) and IV2(+) Group 0 DC COM 0 I/0 through I/3 1763-L16BWA Group 1 DC COM 1 I/4 through I/9 Group 2 IA COM IV1(+) and IV2(+) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 35: Sinking And Sourcing Wiring Diagrams

    Figure 20 - 1763-L16AWA Input Wiring Diagram USED USED IV1(+) IV2(+) “NOT USED” terminals are not intended for use as connection points. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 36 Figure 24 - 1763-L16BBB and 1763-L16DWD Sourcing Input Wiring Diagram -DCa -DCb +DCa +DCb USED USED IV1(+) IV2(+) Figure 25 - 1763-L16AWA and 1763-L16BWA Output Wiring Diagram +DCa -DCa L2/N 100-240 VAC USED USED Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 37: Controller I/O Wiring

    The analog common (COM) is connected to earth ground inside the module. These terminals are not electrically isolated from the system. They are connected to chassis ground. • Analog channels are not isolated from each other. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 38: Minimize Electrical Noise On Analog Channels

    Use a shielded communication cable (Belden #8761). The Belden cable has two signal wires (black and clear), one drain wire, and a foil shield. The drain wire and foil shield must be grounded at one end of the cable. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 39: Expansion I/O Wiring

    Figure 30 - 1762-IQ8 Wiring Diagram +DC (sinking) -DC (sourcing) IN 0 IN 1 IN 2 IN 3 24V DC IN 4 IN 5 IN 6 IN 7 Commons are -DC (sinking) connected internally. +DC (sourcing) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 40 +DC (sinking) -DC (sourcing) IN 8 IN 9 IN 10 IN 11 24V DC IN 12 IN 13 IN 14 IN 15 -DC (sinking) +DC (sourcing) COM 1 Figure 32 - 1762-IQ32T Wiring Diagram Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 41 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8 24V DC (source) OUT 9 OUT 10 OUT 11 OUT 12 OUT 13 OUT 14 OUT 15 DC COM Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 42 Chapter 3 Wire Your Controller Figure 36 - 1762-OB32T Wiring Diagram Figure 37 - 1762-OV32T Wiring Diagram Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 43 OUT 0 OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 VAC-VDC OUT 8 OUT 9 OUT 10 OUT 11 OUT 12 OUT 13 OUT 14 OUT 15 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 44 IN 6 IN 7 -DC (sinking) COM 1 +DC (sourcing) Connected internally L1 or +DC L1 or +DC OUT 0 OUT 1 L2 or -DC OUT 2 OUT 3 OUT 4 OUT 5 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 45: Analog Wiring

    This characteristic is common to most analog outputs. While the majority of loads will not recognize this short signal, it is recommended that preventive measures be taken to ensure that connected equipment is not affected. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 46 Figure 44 - Differential Sensor Transmitter Types IN 0 (+) Analog sensor IN 0 (-) IN 1 (+) IN 1 (-) I out 0 Load I out 1 V out 0 V out 1 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 47 Programmable Controllers Instruction Set Reference Manual, publication 1763-RM001. You can access the switches through the ventilation slots on the top of the module. Figure 46 - 1762-IF4 Switch Positions Ch0 Ch1 Ch2 Ch3 Switch location Voltage (OFF) Current (ON) default Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 48 IN - Transmitter 3-wire Transmitter Module Supply Signal IN + Power supply IN - Transmitter 4-wire Transmitter Signal Module Supply IN + Power supply IN - (1) All power supplies rated N.E.C. Class 2 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 49 Figure 51 - 1762-OF4 Wiring I out 0 Current load I out 1 I out 2 I out 3 V out 0 Voltage load V out 1 V out 2 V out 3 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 50 Chapter 3 Wire Your Controller Notes: Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 51: Communication Connections

    Table 7 - DF1 Full-duplex Default Configuration Parameters Parameter Default Baud Rate 19.2 KBps Parity None Source ID (Node Address) Control Line No handshaking Error Detection Embedded Responses Auto detect Duplicate Packet (Message) Detect Enabled ACK Timeout 50 counts Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 52: Use The Communications Toggle Functionality

    1. On the Main Menu screen, select Advance Set by using the Up and Down keys on the LCD keypad. If the menu items are not displayed on the Main Menu screen, scroll down the screen by pressing the Down key. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 53 The DCOMM status indicator, which is the third of the five indicators at the top left of the LED display, is displayed as an empty rectangle. It means that the communication configuration is set to a user-defined communication mode. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 54 If you change to the user-defined configuration from the default configuration mode by selecting Disable and pressing OK, the DCOMM Mode Change Notification displays. 6. Press ESC to return to the Advanced Settings Menu screen, as shown in step Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 55: Connect To The Rs-232 Port

    You can connect a MicroLogix 1100 controller to your computer directly without using an external optical isolator, such as Advanced Interface Converter (AIC+), catalog number 1761-NET-AIC, as shown in Figure 53, because Channel 0 is isolated within the controller. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 56: Use A Modem

    You can connect a MicroLogix 1100 controller to your modem directly without using an external optical isolator, such as AIC+, catalog number 1761-NET-AIC, as shown in Figure 54, because Channel 0 is isolated within the controller. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 57: Connect To A Df1 Half-Duplex Network

    The 1761-NET-AIC needs a delay time to change from transmit to receive mode. (x1 ms) When the Control Line is set to DF1 Half-duplex Modem, this is the minimum time delay between receiving the last character of a packet and the RTS assertion. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 58 EXTERNAL MicroLogix 1000 MicroLogix 1100 MicroLogix 1200 MicroLogix 1500 controller MicroLogix 1500 controller with SLC 5/03 processor (slave) controller (slave) controller (slave) controller (slave) with 1764-LSP or 1764-LRP 1764-LRP processor (slave) processor (slave) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 59: Connecting To A Dh-485 Network

    Table 10 - DH-485 Configuration Parameters Parameter Options Baud Rate 9600, 19.2 KBps Node Address 1...31 decimal Token Hold Factor 1...4 Software Considerations on page 150 for tips on setting the parameters listed in Table Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 60 24V DC (user supplied) Port 1 or port 2 to PC 1747-CP3 or 1761-CBL-AC00 (1) DB-9 RS-232 port (2) mini-DIN 8 RS-232 port (3) RS-485 port (4) Series A or later cables are required. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 61: Recommended Tools

    64 if you are using standard Allen-Bradley cables.) Connecting the Communication Cable to the DH-485 Connector A daisy chained network is recommended. Do not make the incorrect connection that is shown in Figure Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 62 Terminal 5 - (Data A) (1) To prevent confusion when installing the communication cable, cut back the white with blue stripe wire immediately after the insulation jacket is removed. This wire is not used by DH-485. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 63: Ground And Terminate The Dh-485 Network

    0 is isolated. However, you must use an AIC+ to connect your computer or other MicroLogix family products, such as MicroLogix 1200 controllers, to a DH-485 network. Figure 64 shows the external wiring connections and specifications of the AIC+. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 64: Cable Selection Guide

    (1) An external power supply is required unless the AIC+ is powered by the device that is connected to port 2, then the selection switch should be set to cable. (2) Series C or later cables are required. 1761-CBL-HM02 1761-CBL-AM00 1761-CBL-AH02 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 65 (1) An external power supply is required unless the AIC+ is powered by the device that is connected to port 2, then the selection switch should be set to cable. 1761-CBL-PM02 Series C (or equivalent) Cable Wiring Diagram 6 8 7 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 66: Recommended User-Supplied Components

    (2) On port 1, pin 4 is electronically jumpered to pin 6. Whenever the AIC+ is powered on, pin 4 matches the state of pin 6. (3) In the 1761-CBL-PM02 cable, pins 4 and 6 are jumpered together within the DB-9 connector. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 67: Safety Considerations

    Set the DC Power Source selector switch to EXTERNAL before connecting the power supply to the AIC+. Figure 66 shows where to connect external power for the AIC+. Figure 66 - External Power for AIC+ NEUT Bottom view Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 68: Connecting To Ethernet

    The Ethernet connector, Channel 1, is an RJ45, 10/100 Base-T connector. The pinout for the connector is shown in Table Table 16 - RJ45 Connector Pinout Pin Name Not used by 10/100Base-T Not used by 10/100Base-T Not used by 10/100Base-T Not used by 10/100Base-T Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 69 (1-1, 2-2, 3-3, 6-6). • Direct point-to-point 10/100 Base-T cables connecting the MicroLogix 1100 controller Ethernet port directly to another Ethernet port (or a computer 10/100Base-T port) require a cross-over pinout (1-3, 2-6, 3-1, 6-2). Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 70 Chapter 4 Communication Connections Notes: Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 71: Use The Lcd And Keypad

    The LCD and keypad are shown in Figure Figure 67 - Controller LCD and Keypad Top view Table 17 - LCD and Keypad Feature Description LCD screen keypad (ESC, OK, Up, Down, Left, and Right buttons) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 72: Operating Principles

    Startup screen and specifying the CBS element of the LCD Function File to the address of this string file. Figure 70 shows an example of a customized Startup screen. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 73: Main Menu And Default Screen

    I/O Status on page 76 digital I/O. Monitor Bit File on page 77 Monitoring Allows you to view and change the data value of a bit and an integer file. Monitor Integer File on page 82 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 74: Operating Buttons

    • Go to the previous menu level. • Cancel your entry since the last Ok. • Press repeatedly to go to the main menu. • Change menu item. • Change value. • Change position. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 75: Select Between Menu Items

    Move the cursor with the up/down arrows Full block navigation is shown as a flashing block: • Change position with left/right arrows • Change values with up/down arrows Flashing value is presented as an empty rectangle for explanation purpose. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 76: Setting Values

    LCD menu. If you are at the other screen and want to view I/O status, you have to enter the I/O Status screen manually using the menu. Otherwise, the current screen is displayed continuously. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 77: View I/O Status

    The TBF element can only be changed by a program download. Target Bit File Number (TBF) User Program Feature Address Data Format Type Access Target Bit File Number LCD:0.TBF Word (INT) Control Read-only Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 78 • Remaining addresses within the target file can be used without restrictions (addresses B3:6/0 and above, in this example). • The LCD always starts at bit 0 of a data file. It cannot start at any other address within the file. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 79: Monitor A Bit File

    The TBF element of the LCD Function File is set to 3 to specify the bit file B3 as the target bit file to monitor on the LCD, as shown in Figure Figure 75 - LCD Function File • The controller mode is set to Remote Run. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 80 Then, “ON” flashes, which means the cursor is at the data value position. 6. Press the Down key. Then, the data value is represented as “OFF”. Note that “OFF” continues to flash, which means the cursor is still at the data value position. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 81 9. Try to move the cursor to the data value position by pressing OK. Because the B3:0/2 bit is a protected bit, you find that the cursor does not move to the data value position. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 82: Monitor Integer File

    The maximum range of bits you can monitor with the Bit File Monitoring functionality on the LCD is the first 48 bits (3 words). Table 20 shows an example of how the LCD uses the configuration information with integer file number 7 (LCD:0.TIF=7). Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 83: Monitor An Integer File

    For the explanations in this section, we assume the following in the application program: • An integer file N7, which is 53 elements long (53 words), is defined with the preset data, as shown in Figure Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 84 The TIF element of the LCD Function File is set to 7 to specify the integer file N7 as the target integer file to monitor on the LCD, as shown in Figure Figure 77 - LCD Function File • The controller mode is set to Remote Run. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 85 5. We change the data value of the N7:0 word to the negative decimal value -1300. First, press OK to move the cursor to the data value position. Then, the last digit of “+00000” flashes, which means the cursor is at the data value position. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 86 9. Press OK to apply the changes. Then, the new value -1300 is applied. The target word “0”, which is right to “N7:”, flashes. The cursor is moved automatically to the target word position. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 87 Press the Up key again, and you find the target word does not change to “48”. It is because the maximum range of words you can monitor with the LCD is the first 48 words of the specified target integer file. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 88: Use The Mode Switch

    Table 21 - Possible Controller Modes by Mode Switch Position When the Mode Switch Positions at Possible Controller Modes are Download in progress PROGRAM Program mode Suspend mode – Operation halted by execution of the SUS instruction Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 89: Change Mode Switch Position

    To forcibly set Mode Switch to PROG when the controller is powered up: • Press ESC for 5 seconds when the controller is powered up. The following LCD screen appears if it’s successfully done. Note that I/O output status may be changed for some programs. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 90: Use A User-Defined Lcd Screen

    LCD screen, see the MicroLogix 1100 Programmable Controllers Instruction Set Reference Manual, publication 1763-RM001. By using the User Displ menu item, you can change from the default built-in screens to a user- defined screen and back on the LCD. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 91: User-Defined Lcd Screen

    The U-MSG indicator on the top of the LCD displays as a solid rectangle. It means that the LCD is in User-defined LCD mode. If a user-defined screen is used in your application program, the LCD screen displays, according to the specific instructions used in your program. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 92: Configure Advanced Settings

    OK after you have changed the value using the Up and Down keys. By using the Key In Mode screen, as shown in Figure 78, you can change the Key In mode to use. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 93: Change Key In Mode

    Down key. 2. Press OK on the LCD keypad. The Advanced Settings Menu screen displays. 3. Select KeyIn Mode using the Up and Down keys, then press OK. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 94: Communications Toggle Functionality

    The MicroLogix 1100 controller provides the Communications Toggle functionality, which allows you to switch between the user-defined communication configuration and the default Functionality communications mode on Channel 0. See Use the Communications Toggle Functionality on page 52 for information on this feature. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 95: Ethernet Port Configuration

    A MAC address is a 12-digit hexadecimal number. Your controller ships with a unique MAC address assigned in the factory. You can identify the MAC address of your controller by opening the expansion module cover on your controller. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 96: Trimpots

    LCD. To access the Trimpot Set screen, which is the top screen for the trimpot functionality, select TrimPot Set on the LCD default menu screen, and press OK on the LCD keypad. Trimpot data is updated continuously whenever the controller is powered-up. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 97: Changing Data Value Of A Trimpot

    Controllers Instruction Set Reference Manual, publication 1763-RM001. IMPORTANT The same TMIN and TMAX values are used for both trimpots, POT0 and POT1. This behavior is intended by design for simplicity in the trimpot configuration. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 98: Trimpot Configuration In Lcd Function File

    2. Press OK on the LCD keypad. The Advanced Settings Menu screen displays. 3. If System Info is selected, press OK. If not, select System Info using the Up and Down keys, then press OK. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 99: View Fault Code

    2. Press OK on the LCD keypad. The Advanced Settings Menu screen displays. 3. If Fault Code is selected, press OK. If not, select Fault Code using the Up and Down keys, then press OK. 4. The Fault Code screen displays. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 100 For more information on a specific fault code, see the Online Help of your RSLogix 500 programming software. 5. Press ESC to return to the Advanced Settings Menu screen, as shown in step Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 101: Use Real-Time Clock And Memory Modules

    When the battery is low, the indicator displays as a solid rectangle ( ). When the battery level is acceptable, the indicator displays as an empty rectangle ( ), as shown in Figure Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 102: Memory Module Operation

    (run or test) mode. To enable this feature, set the S:2/9 bit in the system status file. See “Status System File” in the MicroLogix 1100 Programmable Controllers Instruction Set Reference Manual, publication 1763-RM001 for more information. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 103: Data File Download Protection

    To upload the program and data from the controller’s memory to a memory module, on the “Comms” menu in your RSLogix 500 programming software, point “EEPROM” and then select “Store to EEPROM”. For more information on program/data upload, see your RSLogix 500 programming software documentation. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 104 Chapter 6 Use Real-time Clock and Memory Modules Notes: Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 105: Online Editing

    Test edits — Allows you to verify that the changes you entered are not going to cause improper machine operation before you make the changes a permanent part of your ladder program. • Untest edits — Allows you to disable testing Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 106: Effects Of Online Editing On Your System

    Online editing cannot change the size of existing data tables nor can new ones be created. However, some ladder instructions, when programmed cause data table values to change. These instructions are those that require timer, counter, and control addresses to be specified. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 107: Online Edit Error

    If not, an error occurs and the programming software goes offline due to default image mismatch between the RSLogix 500 programming software and the MicroLogix 1100 controller. You can also see the fault code 1Fh, which is a user-defined fault code. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 108: Types Of Online Editing

    Runtime Online Editing — When the controller is in either REM Test or REM Run mode Table 24 summarizes the MicroLogix 1100 controller mode switch positions in the LCD and modes that enable online editing. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 109: Edit Functions In Runtime Online Editing

    If you perform a program online edit, once you accept or delete the rung, the edits take effect immediately and the power rail is displayed as a solid line. If you edit a rung with edit zone markers, the markers are removed when the rung is accepted. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 110 Chapter 7 Online Editing Notes: Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 111: Specifications

    10V/m, 26…1000 MHz (alternatively, 80…1000 MHz), 80% amplitude modulation, +900 MHz keyed carrier EN 61000-4-4 Fast transient immunity 2 kV, 5 kHz Communications cables such as Ethernet, RS-232, and RS-485: 1 kV, 5 kHz Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 112 12 kΩ @ 50 Hz Nominal impedance 3.1 kΩ 3.1 kΩ 10 kΩ @ 60 Hz Inrush current @ 120V AC, max 250 mA Not applicable (1) OS series B FRN 4 or later Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 113 Relay Outputs Turn on time/Turn off time, max 10 ms Relay life - Electrical (Resistive Load) Figure 83 Relay life - Mechanical 10,000,000 cycles Load current, min 10 mA (1) Scan time dependent Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 114 (5) For DC voltage applications lower than 125V DC, the make/break ampere rating for relay contacts can be determined by dividing the voltampere rating by the applied DC voltage but the current values are not to exceed the thermal continuous current. ATTENTION: Do not exceed the “Current per group common” specification. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 115 FET transistor outputs, but in addition, within a limited current range, they may be operated at a higher speed. Outputs 2 and 3 also provide a pulse train output (PTO) or pulse-width modulation output (PWM) function. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 116 1.100 2.000 1.300 2.000 250 Hz 4.000 2.800 4.000 2.700 4.000 125 Hz 5.800 8.000 5.300 8.000 63 Hz 8.000 16.000 11.000 16.000 10.000 16.000 31 Hz (1) This is the default setting. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 117 Verified by one of the following dielectric tests: 1836V AC for 1 s or 2596V DC for 1 s Output group to output group isolation 265V AC Working Voltage (basic insulation) 150V Working Voltage (IEC Class 2 reinforced insulation) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 118: 1762 Expansion I/O Specifications

    (+V) of the field supply are sourcing field devices. (2) For derating chart, see MicroLogix 1762-IQ16 DC Input Module Installation Instructions, publication 1762-IN010. (3) Only applicable for series B and series C I/O modules. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 119 110 mA at 5V DC Bus current draw, max 90 mA at 24V DC (2.16 W) 110 mA at 24V DC (2.64 W) 80 mA at 24V DC 180 mA at 24V DC (4.32 W) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 120 (4) DC Make/Break Voltamperes must be limited to 50VA for DC voltages between 28V DC and 125V DC. DC Make/Break Voltamperes below 28V DC are limited by the 7 A Make/Break current limit. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 121 40 g - DIN rail mounted Emissions IEC 61000-6-4 EC 61000-4-2: ESD immunity 4 kV contact discharges 8 kV air discharges IEC 61000-4-3: Radiated RF immunity 10V/m with 1 kHz sine wave 80% AM from 80…6000 MHz Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 122: Analog I/O Modules

    50 mA @ 24V DC 50 mA @ 24V DC Analog normal Voltage: 0…10V DC Voltage: -10…+10V DC Voltage 0…10V DC Not applicable Not applicable operating range Current: 4…20 mA Current: 4…20 mA Current: 4…20 mA Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 123 (1) For proper operation, both the plus and minus input terminals must be within ±27V (±10V for 1762-IT4) of analog common. (2) V = 1 V pk-pk (3) Only applicable for series B and series C I/O modules. (4) V = 0 (includes offset, gain, non-linearity, and repeatability error terms) Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 124 25 Ω (for specified accuracy) Open-circuit detection time 7 ms…1.515 s The module performs auto-calibration upon power-up and whenever a channel is enabled. You can also Calibration program the module to calibrate every 5 minutes. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 125 ±0.69 µV/ °C [±01.25 µV/ °F] (1) The module uses the National Institute of Standards and Technology (NIST) ITS-90 standard for thermocouple linearization. (2) Temperature drift with auto-calibration is slightly better than without auto-calibration. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 126 10V rms with 1 Hz sine wave 80% AM from 150 kHz…80 MHz (1) See the module’s Installation Instruction for exact operating temperature range. (2) For grounded thermocouples, the 10V level is reduced to 3V. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 127 Korean Registration of Broadcasting and Communications Equipment, compliant with: Article 58-2 of Radio Waves Act, Clause 3 (1) See the Product Certification link at rok.auto/certifications for Declaration of Conformity, Certificates, and other certification details. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 128 Appendix A Specifications Notes: Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 129: Replacement Parts

    3. Secure the battery connector wires along the wire guide, as shown in Figure Figure 86 - Replaceable Battery Wire Connection Replaceable battery pocket Replaceable battery Battery wires Battery wire connector Wire guide Battery connector Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 130: Battery Handling

    IATA Articles Regulations of the International Air Transport Association, Geneva, Switzerland. IMPORTANT Regulations for transportation of lithium batteries are periodically revised. See www.dot.gov for the latest shipping information. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 131: Disposal

    For a lithium battery product safety data sheet, contact the manufacturer: Sanyo Energy Corporation Tadarand U.S. Battery Division 2001 Sanyo Avenue 2 Seaview Blvd. San Diego, CA 92173 Port Washington, NY 11050 (619) 661-4801 (516) 621-4980 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 132 Appendix B Replacement Parts Notes: Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 133: Troubleshoot Your System

    No fault detected FAULT Flashing red Application fault detected Steady red Controller hardware faulted No forces installed FORCE Steady amber Forces installed Flashing amber Forces installed in force files, but forcing is disabled Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 134: Status Indicators On The Lcd

    (1) To view the status of inputs and outputs on the LCD, you need to enter the I/O LED mode screen using the LCD menu. See Status on page 76 for more information. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 135: Normal Operation

    Controllers Instruction Set Reference Manual, publication 1763-RM001. RUN, FORCE, and Missing or corrupt operating FAULT LEDs all Operating system fault Missing or Corrupt OS LED Pattern on page 144. system flashing Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 136: Controller Error Recovery Model

    Return controller to RUN or any of the REM test modes. Table 34 for probably Table 34 for probable cause and recommended cause and recommended action. action. Test and verify system operation. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 137: Analog Expansion I/O Diagnostics And Troubleshooting

    37. The type of error determines what kind of information exists in the extended error information field. These types of module errors are typically reported in the controller’s I/O status file. See MicroLogix 1100 Programmable Controllers Instruction Set Reference Manual, publication 1763-RM001 for more information. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 138: Error Codes

    0 0000 0000 No error X200 0 0000 0000 General hardware error; no additional information General Common Hardware Error X201 0 0000 0001 Power-up reset state Hardware-specific Error X300 1 0000 0000 Reserved Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 139: Calling Rockwell Automation For Assistance

    0 0000 1100 Invalid format select (Channel 3) (1) X represents “Don’t Care”. Calling Rockwell If you need to contact Rockwell Automation or local distributor for assistance, it is helpful to obtain the following (prior to calling): Automation for Assistance •...
  • Page 140 Appendix C Troubleshoot Your System Notes: Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 141: Use Controlflash To Upgrade Your Operating System

    The newer OS firmware for the controller is prepared in DMK disk image format which requires ControlFLASH version 13.00 or later. To download new OS firmware for a MicroLogix controller, go to the Rockwell Automation Product Compatibility and Download Center (PCDC) at rok.auto/pcdc.
  • Page 142 4. Select one or more DMK files that you want to extract, then select Extract. The DMK Extraction Progress dialog box appears. 5. After the extraction is complete, select OK to close the dialog box. 6. Select Cancel to close the DMK Extraction Tool. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 143: Prepare The Controller For Firmware Update

    The following steps detail the key events in the upgrade process. 1. Controller mode and communications parameters are checked. The screen as shown below is displayed on the LCD as well. 2. Download begins. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 144: Missing Or Corrupt Os Led Pattern

    Missing or Corrupt OS LED When an operating system download is not successful or if the controller does not contain a valid operating system, the controller flashes the Run, Force, and Fault LEDs on and off. Pattern Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 145: Connect To Networks Via Rs

    Example DF1 Full-Duplex Connections For information about required network connecting equipment, see Communication Connections on page (a) OS series B FRN 4 or later. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 146: Df1 Half-Duplex Protocol

    As a DF1 Half-duplex master, the MicroLogix 1100 controller supports both the reception and initiation of broadcast write commands (via the MSG instruction). The MicroLogix 1100 controller also supports Half-duplex modems using RTS/CTS hardware handshaking. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 147: Considerations When Communicating As A Df1 Slave On A Multi-Drop Link

    • Radio modems Radio modems can be implemented in a point-to-point topology to support either half- duplex or full-duplex communications, or in a multi-drop topology to support half- Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 148: Communication Protocol

    After a node sends a message, it passes the token to the next device. The allowable range of node addresses is 1…31. There must be at least one initiator on the network (such as a MicroLogix controller, or an SLC 5/02 or later processor). Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 149: Dh-485 Configuration Parameters

    Hardware Considerations You must decide the length of the communication cable, where you route it, and how to protect it from the environment where it will be installed. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 150 Addresses of those nodes • Communication rate The following sections explain network considerations and describe ways to select parameters for optimum network performance (speed). See your programming software’s user manual for more information. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 151 You can connect a MicroLogix 1100 controller to your DH-485 network directly without using a RS-232 to RS-485 converter and optical isolator, such as the AIC+ Advanced Interface Converter, 1761-NET-AIC, as shown in Figure 94, because Channel 0 has isolation and RS-485 built-in. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 152: Example Dh-485 Connections

    RS-232 to RS-485 converter and optical isolator, such as the AIC+ Advanced Interface Converter, 1761-NET-AIC, as shown in Figure 94, because Channel 0 has isolation and RS-485 built-in. However, you can use an AIC+ to connect other controllers to a DH-485 network. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 153 PanelView 550 MicroLogix 1100 PanelView terminal controller 1761-CBL-AM00 RJ45 port or 1761-CBL-HM02 AIC+ 1761-CBL-AS09 TERM or 1761-CBL-AS03 SHLD CHS GND DC SOURCE CABLE EXTERNAL 1747-CP3 or 1761-CBL-AC00 This 3-node network is not expandable. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 154: Modbus Communication Protocol

    You can use ASCII by configuring the RS-232/RS-485 port, channel 0 for the ASCII driver. For detailed configuration information, see the MicroLogix 1100 Programmable Controllers Instruction Set Reference Manual, publication 1763-RM001. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 155: Connect To Networks Via Ethernet Interface

    Table 43 - Optimal Performance: MicroLogix 1100 FRN 3 to MicroLogix 1100 Series A OS FRN 3 Controller (2-node Ethernet network) Operation Words MSG per Second Words per Second Single Typed Read Single Typed Reads Single Typed Reads 1,100 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 156: Micrologix 1100 And Computer Connections To The Ethernet Network

    With RSLogix500 programming software version 7.00.00 or later, you can manually set the communication rate and duplex mode of an Ethernet port you have connected to the switch port. The settings of the Ethernet port and the switch port must match. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 157: Cables

    CAT5 UTP cable. These pairs of cables are color-coded white blue/blue, white orange/orange, white green/green, and white brown/brown. They are also numbered one to four in the order shown. Figure 97 - EIA/TIA 568A and 568B Ethernet Cable Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 158: Ethernet Connections

    The connections are dedicated as follows: Dedicated to Number of Connections Outgoing connections Incoming connections (1) Connections established by an INTERCHANGE™ client, RSLinx client, and peers are all included when counting the number of connections. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 159: Duplicate Ip Address Detection

    The IP address of the computer acting as the local Ethernet network Primary Domain Name System (DNS) Primary Name Server 0 (undefined) Read/write server Secondary Name The IP address of the computer acting as the local Ethernet network Secondary Domain Name System (DNS) 0 (undefined) Read/write Server server. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 160: Configure Using Rslogix 500 Programming Software

    The BOOTP server compares the hardware address with the addresses in its look-up table. • The BOOTP server sends a message back to the processor with the IP address and other network information that corresponds to the hardware address it received. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 161: Using The Rockwell Automation Bootp/Dhcp Utility

    DHCP instead of it. Using the Rockwell Automation BOOTP/DHCP Utility The Rockwell Automation BOOTP/DHCP server utility is a standalone program that incorporates the functionality of standard BOOTP software with a user-friendly graphical interface. It is located in the Utils directory on the RSLogix 500 installation CD.

  • Page 162: Use A Dhcp Server To Configure Your Processor

    If an address is located on another subnetwork, messages are routed through a local gateway to be transferred to the destination subnetwork. If your network is not divided into subnets, then leave the subnet mask field at the default. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 163: Manually Configuring Channel 1 For Controllers On Subnets

    Ethernet using a standard web browser. For more information on MicroLogix 1100 embedded web server capability, see the MicroLogix 1100 Embedded Web Server User Manual, publication 1763-UM002. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 164 Appendix F Connect to Networks via Ethernet Interface Notes: Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 165: System Loading Calculations

    1762-OX6I 1762-IQ8OW6 Total Modules (4 maximum): Subtotal: (1) See your expansion I/O Installation Instructions for Current Requirements not listed in this table. (2) Only applicable for series B and series C I/O modules. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 166: System Loading And Heat Dissipation

    Number of Modules @ 5V DC (mA) @ 24V DC (mA) @ 5V DC (mA) @ 24V DC (mA) 1762-IA8 1762-IF4 1762-IF2OF2 1762-IQ8 1762-IQ16 1762-IQ32T 1762-IR4 1762-IT4 1762-OA8 1762-OB8 1762-OB16 1762-OB32T 1762-OF4 1762-OV32T 1762-OW8 1762-OW16 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...

  • Page 167: Calculating Heat Dissipation

    2.9 W x number of modules 2.9 W x _________ ______ W 1762-OB8 1.6 W x number of modules 1.6 W x _________ ______ W 1762-OB16 2.9 W x number of modules 2.9 W x _________ ______ W Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 168 ______ W 1762-IQ8OW6 4.4 W x number of modules 4.4 W x _________ ______ W Add Subtotals to determine Heat Dissipation ______ W (1) Only applicable for series B and series C I/O modules. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 169 Embedded I/O is the controller’s on-board I/O. embedded I/O Electromagnetic interference. 1) A rotary device that transmits position information. encoder 2) A device that transmits a fixed number of pulses for each revolution. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 170 I/O devices. A simple and easy to remember term that is used to represent a complex or lengthy set of mnemonic information. Modulator/demodulator. Equipment that connects data terminal equipment to a modem communication line. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 171 A part of the controller’s operating cycle. During the scan the ladder program is executed and program scan the output data file is updated based on the program and the input data file. Executable programming package used to develop ladder diagrams. programming device Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 172 The main storage available for programs and data and allocated for working storage. workspace To copy data to a storage device. For example, the processor writes the information from the write output data file to the output modules. Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 173 OS LED pattern 144 sequence of operation 143 using 141 battery 101 processor battery life expectancy 129 processor replacement battery 129 baud rate 169 bit 169 block diagrams 169 Boolean operators 169 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 174 22 non-critical 137 instruction 170 Ethernet instruction set 170 advanced functions 162 isolated link coupler messaging 155 installing 61 processor performance 155 isolation transformers using the SLC 5/05 processors 155 power considerations 17 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 175 171 storing 130 normally open 171 transporting 130 replacement kits 129 replacement parts 129 reserved bit 172 offline 171 restore 172 Offline Editing 105 retentive data 172 offset 171 RS-232 172 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 176 1762-IF4 48 controllers 33 terminal groupings 34 terminal groupings 34 throughput 172 Trimpot Information Function File 97 trimpot operation 96 trimpots changing values 96 error conditions 98 location 96 troubleshooting 133 true 172 Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 177 MicroLogix 1100 Programmable Controllers User Manual Rockwell Automation Publication 1763-UM001G-EN-P - May 2024...
  • Page 178 Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec. Allen-Bradley, ControlFLASH, DH+, DTAM Micro, DTAM Plus, expanding human possibility, FactoryTalk, INTERCHANGE, MicroLogix, PanelView, PLC-5, Rockwell Automation, RSLinx, RSLinx Classic, RSLogix 500, SLC, SLC 5/03, SLC 500, and TechConnect are trademarks of Rockwell Automation, Inc.

Table of Contents

Save PDF