Sennheiser EW 300 IEM Instruction Manual page 49

Configuring a channel preset
Transmitter and receiver of the evolution wireless system ew 300 IEM have
8 switchable frequencies (channel presets) respectively to store up to 8 trans-
mission/receiving frequencies. With the SR 300 IEM transmitter, you can
additionally assign a name.
DISPLAY
DISPLAY
You can switch directly between the channel presets (u "Selecting the
frequency, channel number").
TUNE
Setting the transmission/receiving frequency
tune
Transmission and receiving frequencies are tunable in 25-kHz steps within a
switching bandwidth of 32 MHz max.
Special notes on multi-channel operation:
Several devices of the Sennheiser evolution wireless system ew 300 IEM can be
used simultaneously on different frequencies. The factory-preset frequencies are
intermodulation-free. Before you program new frequency combinations, please
refer to the information on the correct frequency choice given in the planning
brochure "Practical Applications in RF Technology" available from your
local Sennheiser agent.
TUNE
Frequency Frequency
CH NO
Channel No. 1 Channel No. 2
NAME
Name
1
Select the channel preset for which you wish to set a frequency.
Select the "TUNE" menu by pressing the
appears on the display; after a short pause the currently set frequency
is displayed.
With the buttons you can now select a different frequency. The
/
frequencies are tunable in 25-kHz steps. The new frequency starts
flashing on the display and becomes effective immediately.
Press the SET button to return to the top menu level. The display
then switches back to the standard display.
TUNE TUNE
Frequency
CH NO CH NO
Channel No. 3
NAME NAME
Name Name
3
2
SET
TUNE
Frequency
CH NO
Channel No. 8
NAME
Name
... 8
button until "TUNE"
51