Sennheiser EW 300 IEM Instruction Manual page 48

DISPL
DiSPL
50
Selecting the contents of the standard display
With the SR 300 IEM you can choose the contents of the standard display
i.e. whether the frequency, the channel number or a name is displayed. With
the EK 300 IEM you can choose whether the frequency or the channel
number is displayed.
Select the "DISPL" menu by pressing the
appears on the display; after a short pause the current setting is
displayed.
With the buttons you can now choose between:
/
Name (SR 300 IEM only):
Frequency:
Channel number:
The new setting for the standard display starts flashing on the display.
Press the SET button to return to the top menu level. The display
then switches to the new standard display.
SET button until "DISPL"
"NAME"
"FREQU"
"CHANNL"