Sennheiser EW 300 IEM Instruction Manual page 47

FocuS Stereo/FOCUS selection (EK 300 IEM)
With the EK 300 IEM you can switch between stereo and FOCUS operation.
During stereo operation (FOCUS "OFF"), the left-right signals are available
as usual (SR 300 IEM transmitter in stereo mode).
During FOCUS operation, the left-right signals are mixed and are available
as a mono signal in both headphone channels (SR 300 IEM transmitter in
stereo mode). You can, for example, set the receiver to FOCUS mode to:
•
•
Limiting the volume at the headphone output (EK 300 IEM)
Ltd
The EK 300 IEM is equipped with a switchable limiter which limits the
volume at the headphone output. With the limiter switched on, the volume
at the headphone output will be reduced by approx. 18 dB.
allow an individual mix of the signals for vocals and backing music,
or
mix two signals with different volume levels (which are then heard as
a correctly mixed mono signal).
Select the "FocuS" menu by pressing the
appears on the display; after a short pause the current setting is
displayed.
Press the button to switch the FOCUS operation on – if you press
the button, the FOCUS operation is switched off. The new setting
– i.e. "Fo on" or "Fo OFF" – starts flashing on the display.
Press the SET button to return to the top menu level. The display
then switches back to the standard display.
Select the "Ltd" menu by pressing the
on the display; after a short pause the current setting is displayed.
Press the button to switch the limiter on – if you press the
the limiter is switched off. The new setting – i.e. "Ltd on" or "Ltd OFF"
– starts flashing on the display.
Press the SET button to return to the top menu level. The display
then switches back to the standard display.
SET button until "FocuS"
SET button until "Ltd" appears
button,
49