Sennheiser EW 300 IEM Instruction Manual page 42

44
LC display panel
SR 300 IEM transmitter
8-step level display for audio signal, left or MONO
8-step level display for audio signal, right
6-segment alphanumeric main display
"MUTE" display. Lights up for a short moment when switching on
the transmitter or when changing the frequency.
Display for the "Frequency" menu. (This display can be the
transmitter's standard display which always appears after
switch-on).
Display for the channel number "Channel". (This display can be
the transmitter's standard display which always appears after
switch-on).
Display for the "Name" menu. (This display can be the
transmitter's standard display which always appears after
switch-on).
"MHZ" (MHz) display. Lights up when the frequency is displayed.
EK 300 IEM receiver
8-step level display for audio (AF) signal
Alphanumeric main display
8-step level display for incoming RF signal
Note:
If the operating steps for adjusting the settings via the menu are similar for
both devices, only the main display of the SR 300 IEM transmitter is shown.